{"product_id":"micoair-wifi-link-dual-band-wifi-6-telemetry-module-for-ardupilot-px4-wireless-tuning-multi-drone-networking","title":"MicoAir WiFi Link – Dual-Band WiFi 6 Telemetry Module for ArduPilot \/ PX4 Wireless Tuning \u0026 Multi-Drone Networking","description":"\u003cp\u003eThe \u003cstrong\u003eMicoAir WiFi Link\u003c\/strong\u003e is a dual-band \u003cstrong\u003eWiFi 6\u003c\/strong\u003e telemetry module that gives your ArduPilot or PX4 flight controller a wireless MAVLink connection to the ground station — tune, monitor and upload missions without plugging a USB cable into the aircraft. OFDMA and downlink MU-MIMO support keep connections reliable when many aircraft share one network, making it a practical building block for drone-swarm and light-show fleets.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can do with it\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWireless ArduPilot \/ PX4 tuning\u003c\/strong\u003e — works with Mission Planner, QGroundControl and MicoPilot over MAVLink UDP.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-drone networking\u003c\/strong\u003e — STA mode puts a whole fleet and one ground station on the same router (works with Skybrush workflows).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobotics wireless serial link\u003c\/strong\u003e — bidirectional Serial ↔ UDP transparent transmission for any short-range, high-bandwidth link.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBLE telemetry\u003c\/strong\u003e — Bluetooth serial link for the MicoPilot mobile app (BLE is supported by MicoPilot only).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eESP32-C5 main controller\u003c\/li\u003e\n  \u003cli\u003eDual-band 2.4 GHz \/ 5 GHz, WiFi 6 (802.11ax), backward compatible with 802.11 a\/b\/g\/n\/ac\u003c\/li\u003e\n  \u003cli\u003eShips in AP mode — connect your PC or phone straight to the module's hotspot, no network setup\u003c\/li\u003e\n  \u003cli\u003eSTA mode for router-based, multi-aircraft networks\u003c\/li\u003e\n  \u003cli\u003eBuilt-in web configuration page (192.168.4.1) plus full AT-command configuration over USB-C\u003c\/li\u003e\n  \u003cli\u003eTelemetry baud rates 57600–921600 (default 115200); firmware upgradable via MicoAssistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMain controller\u003c\/td\u003e\n\u003ctd\u003eESP32-C5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWireless standard\u003c\/td\u003e\n\u003ctd\u003eWiFi 6 \/ 802.11ax, backward compatible with 802.11 a\/b\/g\/n\/ac\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFrequency bands\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz \/ 5 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterfaces\u003c\/td\u003e\n\u003ctd\u003eLVTTL (3.3 V) serial \/ USB Type-C (CH340)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax range (AP mode)\u003c\/td\u003e\n\u003ctd\u003e100 m — direct to phone\/PC, open environment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax range (STA mode)\u003c\/td\u003e\n\u003ctd\u003e500 m — via high-power router, open environment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax range (BLE)\u003c\/td\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTelemetry baud rates\u003c\/td\u003e\n\u003ctd\u003e57600 \/ 115200 (default) \/ 230400 \/ 460800 \/ 921600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDefault UDP port\u003c\/td\u003e\n\u003ctd\u003e14550\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating voltage\u003c\/td\u003e\n\u003ctd\u003e5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAverage operating current\u003c\/td\u003e\n\u003ctd\u003e150 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34.5 × 23.5 × 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.5 g (without antenna)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFree 3D-printable case — designed by Robofusion\u003c\/h2\u003e\n\u003cp\u003eThe WiFi Link ships as a bare board with a bare antenna. Robofusion has designed a 3D-printable protective case for the module and a matching antenna cover — free to download and print. Download links (Robofusion store and MakerWorld) will be posted here.\u003c\/p\u003e\n\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/docs.robofusion.net\/telemetry-radios\/wifi-link-user-manual\"\u003eMicoAir WiFi Link — User Manual\u003c\/a\u003e — specs, AP\/STA\/BLE modes, wiring, web configuration and the full AT command reference.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/docs.robofusion.net\/telemetry-radios\/wifi-link-multi-drone-networking\"\u003eMulti-Drone Networking Tutorial\u003c\/a\u003e — one ground station, many aircraft: complete STA-mode setup for swarm and light-show fleets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eGood to know before you buy\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe flight-controller serial port must be set to the same baud rate as the module (115200 by default).\u003c\/li\u003e\n  \u003cli\u003eTX and RX are cross-connected between module and flight controller, with a common ground.\u003c\/li\u003e\n  \u003cli\u003eBLE and 2.4 GHz WiFi share one antenna and cannot run simultaneously; factory default is 5 GHz WiFi (AP) + BLE.\u003c\/li\u003e\n  \u003cli\u003eBLE connection is currently supported by the MicoPilot app only; Mission Planner and QGC connect over WiFi UDP.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":54008631394623,"sku":"MICOAIR-WIFI-LINK","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir-WiFi-Link_1.png?v=1783452654","url":"https:\/\/robofusion.ca\/fr\/products\/micoair-wifi-link-dual-band-wifi-6-telemetry-module-for-ardupilot-px4-wireless-tuning-multi-drone-networking","provider":"RoboFusion","version":"1.0","type":"link"}