{"title":"All Products","description":"","products":[{"product_id":"mtf-01-integrated-laser-rangefinder-optical-flow-module-for-unmanned-aerial-vehicles-uavs","title":"OPTICAL FLOW \u0026 LIDAR SENSOR MTF-01 Compatible with Ardupilot\/PX4\/INAV","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMTF-01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process.\u003cbr\u003e\u003cbr\u003eMTF-01 features an integrated PMW3901 optical flow sensor and a high-performance TOF sensor, which can be used normally in outdoor sunlight environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct weight: 4.5g\u003cbr\u003e\u003cbr\u003eProduct size: 29 * 16.5 * 15mm\u003cbr\u003e\u003cbr\u003eOutput mode: UART\u003cbr\u003e\u003cbr\u003eOutput frequency: 100Hz\u003cbr\u003e\u003cbr\u003eTOF Range: 0.02-8m\u003cbr\u003e\u003cbr\u003eanging dead zone: 2cm\u003cbr\u003e\u003cbr\u003eRange accuracy: 2%\u003cbr\u003e\u003cbr\u003eWavelength: 830-870nm\u003cbr\u003e\u003cbr\u003eResistance to ambient light: 70K Lux illumination\u003cbr\u003e\u003cbr\u003eDistance FOV: 6 °\u003cbr\u003e\u003cbr\u003eOptical flow FOV: 42 °\u003cbr\u003e\u003cbr\u003eAmbient light demand of optical flow:\u0026gt;60Lux\u003cbr\u003e\u003cbr\u003eOptical flow working distance:\u0026gt;80mm\u003cbr\u003e\u003cbr\u003ePower consumption: 500mW\u003cbr\u003e\u003cbr\u003eOperating voltage: 4.0- 5.5V\u003cbr\u003e\u003cbr\u003eOperating temperature: - 10 ° C-60 °C\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i8.16195Mpn5MpnPo\"\u003eUSER MANUAL \u0026amp; Configurator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i8.16195Mpn5MpnPo\"\u003e(Download MicoAssistant from here)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MTF-01_USER_MANUAL\" target=\"_blank\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eGitHub - micoair\/MTF-01_USER_MANUAL\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e or\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAssistant_v0.9.15_no_chart.exe?v=1706200224\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eMicoAssistant_v0.9.15\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor 3D file\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/grabcad.com\/library\/mtf_01_optical-flow-lidra-sensor-1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ehttps:\/\/grabcad.com\/library\/mtf_01_optical-flow-lidra-sensor-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor Case (Designed by ROBOFUSION)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/grabcad.com\/library\/mtf-01-optical-flow-lidar-sensor-case-1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ehttps:\/\/grabcad.com\/library\/mtf-01-optical-flow-lidar-sensor-case-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What are the similarities and differences between the MTF-01, MTF-01P, and MTF-02 sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: All three sensors integrate TOF (Time of Flight) and optical flow functions, and they all use the same optical flow module—PMW3901. However, their TOF sensors differ:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMTF-01\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eMTF-01P\u003c\/span\u003e\u003cspan\u003e use more powerful TOF sensors, providing a longer range. The MTF-01P also utilizes a laser light source, extending the maximum range to 12 meters, and includes an injection-molded casing.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMTF-02\u003c\/span\u003e\u003cspan\u003e uses a lower-power TOF sensor, making it ideal for smaller drones where weight and size are critical factors.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: How do I choose the right sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: When selecting a sensor, you can follow these guidelines:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/micoair-optical-flow-lidar-sensor-mtf-02-compatible-with-ardupilot-px4-inav\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-02\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Best suited for small drones of 3 inches or less, as it is compact and lightweight, reducing the burden on your drone.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/mtf-01-integrated-laser-rangefinder-optical-flow-module-for-unmanned-aerial-vehicles-uavs\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-01\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Ideal for drones between 3-5 inches or larger, offering the best cost-performance ratio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/optical-flow-lidar-sensor-mtf-01p-compatible-with-ardupilot-px4-inav\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003eMTF-01P\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Perfect for drones that require longer range and need to operate in more complex environments, such as low-reflectivity surfaces (e.g., black carpets) or bright light conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe hardware interfaces, protocol settings, and setup methods for different flight controllers are the same for all three sensors, so the setup tutorials on YouTube apply to all of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What if I'm still unsure which sensor to choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: If you still have questions about choosing the right sensor, feel free to contact us at \u003c\/span\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGE LIST\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i6.5f1fMn2tMn2txV\"\u003eMTF-01 module *1\u003c\/p\u003e\n\u003cp\u003e20cm SH1.0 4PIN-4PIN cable * 1 \u003c\/p\u003e\n\u003cp\u003e20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.5f1fMn2tMn2txV\"\u003e20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4\/5\/6)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTEST VEDIO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003ca href=\"https:\/\/youtu.be\/KnAwm2J7u3c?feature=shared\" target=\"_blank\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ewww.youtube.com\/watch?v=E2ok7GFnEEA\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003eTechnical Support\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"INAV","offer_id":47234486993215,"sku":"X00439HKJT","price":25.8,"currency_code":"USD","in_stock":true},{"title":"Ardupilot","offer_id":47234517664063,"sku":"X00439BHM5","price":25.8,"currency_code":"USD","in_stock":true},{"title":"PX4","offer_id":47234517696831,"sku":"X00439HKY9","price":25.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir-Optical-Flow-Lidar-Sensor-MTF-01-Compatible-with-Ardupilot-PX4-INAV_jpg.png?v=1727335837"},{"product_id":"m10g-5883-m10-gps-with-compass-qmc5883l-module-for-fpv-racing-drones-robotics-boats","title":"MicoAir M10G-5883  M10 GPS with Compass QMC5883L Module For FPV\/Racing Drones\/Robotics\/Boats","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eM10G-5883 module uses multi-constellation GNSS chip powered by u-blox M10050.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eM10G-5883 supports concurrent reception of GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe high-gain 18 x 18 x 4 mm antenna from CIROCOMM provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGNSS u-blox M10050 (GPS, GLONASS, Galileo and BeiDou)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMagnetic Compass QMC5883L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePatch antenna 18*18*4mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInput voltage range: 4~6V (5V pad\/pin)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePower consumption: 30mA\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUART baudrate: 115200 default\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOperating Temperatures: -20~80 °C\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUART(TX, RX) interface for M10050\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eI2C(DA, CL) interface for Compass QMC5883L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSH-1.0 6P connector ,1.00mm pitch\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGNSS PPS LED, Green. (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProtocol: UBX(u-blox) 10Hz@GPS+GAL+BDS or NMEA 1Hz\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20mm*20mm*8mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e7g\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e.\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":46251278336319,"sku":"X00436JHIT","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/M10G-5883-GNSS-Module-20mm-size-with-Compass-QMC5883L-Module-For-FPV-Racing-Drones-Robotics-Boats_jpg.png?v=1727336240"},{"product_id":"m9-5883-gps-small-size-gnss-module-with-compass-qmc5883l-micoair-tech-mg-903-for-fpv-racing-drones-replace-m9n-5883","title":"M9-5883 GPS Small Size GNSS Module with Compass QMC5883L MicoAir Tech MG-903 For FPV\/Racing Drones Replace M9N-5883","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMG-903 module uses multi-constellation GNSS chip powered by u-blox M9140.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMG-903 supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe high-gain 18 x 18 x 4 mm antenna from CIROCOMM provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGNSS u-blox M9140 (GPS, GLONASS, Galileo and BeiDou)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMagnetic Compass QMC5883L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePatch antenna 18*18*4mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInput voltage range: 4~6V (5V pad\/pin)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePower consumption: 80mA\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUART baudrate: 115200 default\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOperating Temperatures: -20~80 °C\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUART(TX, RX) interface for M9140\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eI2C(SDA, SCL) interface for Compass QMC5883L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSH-1.0 6P connector ,1.00mm pitch\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGNSS PPS LED, Blue. (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProtocol suppoort: UBX + NMEA (DEFAULT)NMEA 1Hz@GPS+GAL+BDS+GLONASS\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e20mm*20mm*8mm 7g\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003e\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003eTechnical Support\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i7.16195Mpn5MpnPo\"\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":46251900633407,"sku":"","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MG-903-GPS-Small-Size-GNSS-Module-with-Compass-IST8310-MicoAir-Tech-MG-903-For-FPV_jpg.png?v=1727335451"},{"product_id":"micoair405-flight-controller-with-bmi088-spl06-support-ardupilot-inav-for-long-range-fpv-drone","title":"MicoAir F405 V2 Flight Controller with BMI088 SPL06, Support Ardupilot INAV, for DJI O3 Air Unit FPV","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicoAir405 v2 is a new cost-effective flight controller runs Ardupilot\u0026amp;INAV firmware, This is the first one which combine the STM32F405 with the high performance IMU sensor BMI088, allowing the flight controllers to have top performance and an attractive price at the same time.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe BMI088 is a high-performance 6-axis IMU sensor that comes from Bosch®, its excellent temperature stability and vibration robustness far exceed similar products on the market, making it particularly suitable for drones and robotics applications.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe MicoAir405 v2 also integrates a high-performance barometer: spl06, and OSD chip: AT7456E, 2 DC-DC channels to provide 5V-3A and 9V-2.5A power output. These characteristics make this controller particularly suitable for long range FPV drones.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINAV\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir405v2 is officially supported by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eINAV\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efrom version 8.0.0\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also download the old version firmware build by us.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MicoAir405v2\/tree\/main\/Firmware\/INAV\" target=\"_blank\" title=\"Github\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eGithub\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArdupilot\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir405v2 flight controller board is officially supported by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eArdupilot\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003estarting from version 4.5.0, you can update the firmware through\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMission Planner\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor download all the firmware files(Copter\/Heli\/Plane\/Rover\/etc) here:\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/firmware.ardupilot.org\/\" target=\"_blank\"\u003eArduPilot Firmware Download\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAlso you can use the online firmware builder provided by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eArdupilot\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto customize your firmware for MicoAir405v2:\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/custom.ardupilot.org\/add_build\" target=\"_blank\"\u003eArduPilot Custom Firmware Builder\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F405RGT6, 168MHz, 1MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: BMI088\u003c\/li\u003e\n\u003cli\u003eBaro: SPL06\u003c\/li\u003e\n\u003cli\u003eOSD: AT7456E\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Slot\u003c\/li\u003e\n\u003cli\u003e6x UART\u003c\/li\u003e\n\u003cli\u003e10x PWM\u003c\/li\u003e\n\u003cli\u003e1x I2C\u003c\/li\u003e\n\u003cli\u003e1x SWD\u003c\/li\u003e\n\u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli\u003eUSB Type-C\u003c\/li\u003e\n\u003cli\u003eBEC 5V 3A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli\u003eBEC 9V 3A output (for video transmitter, camera)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003eSERIAL1 -\u0026gt; UART1 (DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL2 -\u0026gt; UART2 (DJI-VTX, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL3 -\u0026gt; UART3 (GPS)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART4 (DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL5 -\u0026gt; UART5 (ESC Telemetry)\u003c\/li\u003e\n\u003cli\u003eSERIAL6 -\u0026gt; UART6 (RX6 is inverted from SBUS pin, no DMA on TX6)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eRC Input\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe default RC input is configured on the UART6_RX inverted from the SBUS pin. Other RC protocols should be applied at other UART port such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUART1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUART4\u003c\/strong\u003e, and set the protocol to receive RC data:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSERIALn_PROTOCOL=23\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand change SERIAL6 _Protocol to something other than ’23’\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eOSD Support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe MicoAir405v2 supports OSD using OSD_TYPE 1 (MAX7456 driver).\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eVTX Support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe SH1.0-6P connector supports a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDJI O3 Air Unit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnection. Pin 1 of the connector is 9v so be careful not to connect this to a peripheral requiring 5v.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePWM Output\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp dir=\"auto\"\u003eThe MicoAir405v2 supports up to 10 PWM outputs.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eChannels 1-8 support DShot.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eChannels 1-4 support bi-directional DShot. PWM output share grouped and every group must use the same output protocol:\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e1,2,5,6 are group 1\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e3, 4 are group 2\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e7,8 are group 3\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e9,10 are in group 4\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBattery Monitoring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/div\u003e\n\u003cdiv\u003eThe voltage sensor can handle up to 6S LiPo batteries.\u003c\/div\u003e\n\u003cdiv\u003eThe default battery parameters(for Ardupilot) are:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBATT_VOLT_PIN 10\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_PIN 11\u003c\/li\u003e\n\u003cli\u003eBATT_VOLT_MULT 21.2\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_SCALE 116.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eThe MicoAir405v2 does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, Φ4mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 36 x 36 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e.\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"INAV","offer_id":47313790730559,"sku":"","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Ardupilot","offer_id":47313790763327,"sku":"","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/DSC01254_2-1024x1024.webp?v=1710778677"},{"product_id":"mini-px4flight-controller-nxtpx4-flight-controller-h743-bmi088-support-ardupilot-px4","title":"MINI PX4Flight Controller  NxtPX4 V2 Flight Controller  H743\u0026BMI088 Support Ardupilot\u0026PX4","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eOriginal design intention\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCluster Research hopes the drone platform will be smaller. (Travel machine manufacturers are not willing to adapt to the PX4 firmware and will stop production as soon as it is stabilized).\u003c\/li\u003e\n\u003cli\u003eThe hardware designs of many PX4 flight control hardware manufacturers are not open source, which makes it impossible to implement some customized functions (or requires a long detour to implement them).\u003c\/li\u003e\n\u003cli\u003eHigher quality IMU data is provided to VIO and sensing algorithms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardware design based on PX4-V6 standar.\u003c\/li\u003e\n\u003cli\u003eFull adaptation of PX4 firmware (also providing a modified branch of 500HZ IMU rostopic).\u003c\/li\u003e\n\u003cli\u003efuture maintenance and hardware updates.\u003c\/li\u003e\n\u003cli\u003eHardware features：27mm x 29mm x 9mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32H743VIH6, 480MHz, 2MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: BMI088+BMI088(DUAL)\u003c\/li\u003e\n\u003cli\u003eBaro: SPL06\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Slot\u003c\/li\u003e\n\u003cli\u003e7x UART\u003c\/li\u003e\n\u003cli\u003e8x PWM\u003c\/li\u003e\n\u003cli\u003e1x I2C\u003c\/li\u003e\n\u003cli\u003e1x SPI\u003c\/li\u003e\n\u003cli\u003e1x SWD\u003c\/li\u003e\n\u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli\u003eUSB Type-C\u003c\/li\u003e\n\u003cli\u003eBEC 5V 2.5A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli\u003eBEC 12V 2.5A output (for video transmitter, camera)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping(Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003eSERIAL1 -\u0026gt; UART2\u003c\/li\u003e\n\u003cli\u003eSERIAL2 -\u0026gt; UART4\u003c\/li\u003e\n\u003cli\u003eSERIAL3 -\u0026gt; UART1 (GPS)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART3 (DJI-O3)\u003c\/li\u003e\n\u003cli\u003eSERIAL5 -\u0026gt; UART7 (ESC Telemetry)\u003c\/li\u003e\n\u003cli\u003eSERIAL6 -\u0026gt; UART5 (RCIN)\u003c\/li\u003e\n\u003cli\u003eSERIAL7 -\u0026gt; UART8 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping(PX4)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eTELEM1 -\u0026gt; UART2\u003c\/li\u003e\n\u003cli\u003eTELEM2 -\u0026gt; UART4\u003c\/li\u003e\n\u003cli\u003eTELEM3 -\u0026gt; UART7 (ESC Telemetry)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART8 \u003c\/li\u003e\n\u003cli\u003eGPS1 -\u0026gt; UART1\u003c\/li\u003e\n\u003cli\u003eGPS2 -\u0026gt; UART3 \u003c\/li\u003e\n\u003cli\u003eRadio  Controller -\u0026gt; UART5 (RCIN)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eRC Input\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe default RC input port supports SBUS and CRSF protocol.\u003c\/div\u003e\n\u003cdiv\u003eSet\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSERIAL6_PROTOCOL=23\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eon Ardupilot or set\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRC_INPUT_PROTO = Auto\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon PX4.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eVTX Support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe SH1.0-6P connector supports a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDJI O3 Air Unit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econnection. Pin 1 of the connector is 12v so be careful not to connect this to a peripheral requiring 5v.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePWM Output\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe NxtPX4v2 supports up to 8 PWM outputs. Channels 1-8 support DShot.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBattery Monitoring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eThe NxtPX4v2 does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: 20 x 20mm, Φ3mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 27 x 32 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/HKUST-Aerial-Robotics\/NxtPX4\" rel=\"noopener\" target=\"_blank\"\u003eHKUST-Aerial-Robotics\/NxtPX4: Mini PX4 for UAV Group (github.com)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReal flight test\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe actual flight video is at the following link:\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1Kc411s7zb\/?vd_source=47a0b62670644cf403fc3202c1cbd094\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1Kc411s7zb\/?vd_source=47a0b62670644cf403fc3202c1cbd094\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Only FC","offer_id":48033736360255,"sku":"","price":59.99,"currency_code":"USD","in_stock":true},{"title":"FC \u0026 33A Bluejay ESC Flight Stack","offer_id":52963034267967,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/DSC01285_2-768x768.webp?v=1710776626"},{"product_id":"micoair-900mhz-30km-long-range-lora-telemetry-for-drones-and-robotics-lr900-f-data-transmit-module-for-pixhawk-ardupilot-px4","title":"Micoair 915MHz 30KM Long-Range LoRa Telemetry For Drones and Robotics\/ LR900-F \/ Data Transmit Module For Pixhawk\/Ardupilot\/PX4","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LR900-F is a new long-range telemetry radio developed by MicoAir \u003cbr\u003eTechnology based on LoRa spread spectrum technology. It operates in the 890-915MHz frequency band with a maximum transmission power of 500mW and supports FHSS self-interference hopping mode. With the outdoor RF line-of-sight range of 30km or more, it can provide a reliable point-to-point bidirectional communication link for drones, ships, robots, and RTK devices.\u003cbr\u003eIt has two ports: one is a TTL serial port, which can be directly connected to flight controllers and other devices, and the other is a Type-C USB port, which can be connected to a computer or an Android phone.\u003cbr\u003eIn default duplex mode, it only requires the two address parameters to be consistent for direct interconnection communication, which greatly facilitates the installation and use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500mW high power\u003c\/li\u003e\n\u003cli\u003eOn-board SAW filtering\u003c\/li\u003e\n\u003cli\u003eLoRa spread spectrum anti-jamming\u003c\/li\u003e\n\u003cli\u003eFHSS self-avoidance frequency hopping\u003c\/li\u003e\n\u003cli\u003ePoint-to-point two-way communication, symmetric transmission rate\u003c\/li\u003e\n\u003cli\u003eSerial port transparent transmission, adjustable baud rate\u003c\/li\u003e\n\u003cli\u003eOn-board dual interfaces\u003c\/li\u003e\n\u003cli\u003eDiversity antenna support\u003c\/li\u003e\n\u003cli\u003eThe maximum average power consumption of 1W\u003c\/li\u003e\n\u003cli\u003eSmall size for easy integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManual\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/micoair.com\/radio_telemetry_lr900f\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(43, 0, 255); text-decoration: underline;\"\u003eLR900x\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"elementor-heading-title elementor-size-default\"\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_ardupilot\/\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eSetup Tutorial Of Telemetry Radio On Ardupilot\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3 class=\"elementor-heading-title elementor-size-default\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_px4\/\" style=\"color: rgb(43, 0, 255);\"\u003eSetup Tutorial Of Telemetry Radio On PX4\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eData Transmission\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Rate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.1K Byte\/s (default); 1.1K Byte\/s; 0.4K Byte\/s; 3.2K Byte\/s(down) 1.6K Byte\/s(up) in FHSS mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Single-package Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20K Byte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUart Baudrate for JST-GH Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e9600; 19200; 38400; 57600 (default); 115200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUart Baudrate for USB Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e57600 (default); 115200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e43.4 x 25.8 x 11mm (without antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5V DC (from USB or JST-GH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Transmit Current:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e200 mA at 27dBm (LR900-F) \/ 400mA at 30dBm (LR900-P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.3V UART JST-GH1.25-4P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUSB-Type-C (CP2102)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Interface:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSMA (Female)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage List\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLR900 Telemetry Radio Module * 2\u003c\/li\u003e\n\u003cli\u003e915M 2dBi antenna(11cm) * 2\u003c\/li\u003e\n\u003cli\u003e20cm GH1.25-4P to GH1.25-6P Cable (For Pixhawk4\/5\/6) * 1\u003c\/li\u003e\n\u003cli\u003e20cm GH1.25-4P to MX1.25-6P Cable (For Pixhawk1\/2) * 1\u003c\/li\u003e\n\u003cli\u003e20cm GH1.25-4P to SH1.0-4P Cable (For MicoAir405\/743) * 1\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i0.e5a52yiN2yiNnZ\"\u003eUSBA to USB-Type-C * 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i0.e5a52yiN2yiNnZ\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e.\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"pairs","offer_id":47334850953535,"sku":"X0047QCN8L","price":55.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/DSC01070_2-1024x1024.jpg?v=1710780002"},{"product_id":"micoair-optical-flow-lidar-sensor-mtf-02-compatible-with-ardupilot-px4-inav","title":"OPTICAL FLOW \u0026 LIDAR SENSOR Micoair MTF-02 Compatible with Ardupilot\/PX4\/INAV","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMTF-02 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct weight: 1.5g\u003cbr\u003e\u003cbr\u003eProduct size: 25 * 10* 4.5mm\u003cbr\u003e\u003cbr\u003eOutput mode: UART\/IIC\u003cbr\u003e\u003cbr\u003eOutput frequency: 50Hz\u003cbr\u003e\u003cbr\u003eTOF Range: 0.01-2.5m\u003cbr\u003e\u003cbr\u003eanging dead zone: 1cm\u003cbr\u003e\u003cbr\u003eRange accuracy: 2%\u003cbr\u003e\u003cbr\u003eWavelength: 940nm\u003cbr\u003e\u003cbr\u003eResistance to ambient light: 1K Lux illumination\u003cbr\u003e\u003cbr\u003eDistance FOV: 20 °\u003cbr\u003e\u003cbr\u003eOptical flow FOV: 42 °\u003cbr\u003e\u003cbr\u003eAmbient light demand of optical flow:\u0026gt;60Lux\u003cbr\u003e\u003cbr\u003eOptical flow working distance:\u0026gt;80mm\u003cbr\u003e\u003cbr\u003ePower consumption: 200mW\u003cbr\u003e\u003cbr\u003eOperating voltage: 4.0- 5.5V\u003cbr\u003e\u003cbr\u003eOperating temperature: - 10 ° C-60 °C\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfigurator\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAssistant_v0.9.15_no_chart.exe?v=1706200224\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eMicoAssistant_v0.9.15\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSensor 3D File\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MTF-02.step?v=1701835233\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eMTF-02.step\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/grabcad.com\/library\/mtf_02_optical-flow-lidra-sensor-1\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003ehttps:\/\/grabcad.com\/library\/mtf_02_optical-flow-lidra-sensor-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cspan style=\"color: #000000;\"\u003eSensor Case(Designed by ROBOFUSION)\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" rel=\"noopener\" href=\"https:\/\/grabcad.com\/library\/optical-flow-lidar-sensor-mtf-02-case-1\" target=\"_blank\"\u003ehttps:\/\/grabcad.com\/library\/optical-flow-lidar-sensor-mtf-02-case-1\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" rel=\"noopener\" href=\"https:\/\/www.thingiverse.com\/thing:6509445\" target=\"_blank\"\u003ehttps:\/\/www.thingiverse.com\/thing:6509445\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What are the similarities and differences between the MTF-01, MTF-01P, and MTF-02 sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: All three sensors integrate TOF (Time of Flight) and optical flow functions, and they all use the same optical flow module—PMW3901. However, their TOF sensors differ:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMTF-01\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eMTF-01P\u003c\/span\u003e\u003cspan\u003e use more powerful TOF sensors, providing a longer range. The MTF-01P also utilizes a laser light source, extending the maximum range to 12 meters, and includes an injection-molded casing.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMTF-02\u003c\/span\u003e\u003cspan\u003e uses a lower-power TOF sensor, making it ideal for smaller drones where weight and size are critical factors.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: How do I choose the right sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: When selecting a sensor, you can follow these guidelines:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/micoair-optical-flow-lidar-sensor-mtf-02-compatible-with-ardupilot-px4-inav\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-02\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Best suited for small drones of 3 inches or less, as it is compact and lightweight, reducing the burden on your drone.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/mtf-01-integrated-laser-rangefinder-optical-flow-module-for-unmanned-aerial-vehicles-uavs\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-01\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Ideal for drones between 3-5 inches or larger, offering the best cost-performance ratio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/optical-flow-lidar-sensor-mtf-01p-compatible-with-ardupilot-px4-inav\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003eMTF-01P\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Perfect for drones that require longer range and need to operate in more complex environments, such as low-reflectivity surfaces (e.g., black carpets) or bright light conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe hardware interfaces, protocol settings, and setup methods for different flight controllers are the same for all three sensors, so the setup tutorials on YouTube apply to all of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What if I'm still unsure which sensor to choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: If you still have questions about choosing the right sensor, feel free to contact us at \u003c\/span\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGE LIST\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMTF-02 module * 1\u003cbr\u003e\u003cbr\u003e20cm SH1.0 4PIN-4PIN cable * 1 \u003cbr\u003e\u003cbr\u003e20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）\u003cbr\u003e\u003cbr\u003e20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4\/5\/6)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003einfo@robofusion.net\u003c\/span\u003e.\u003cbr\u003e\u003cbr\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003cbr\u003e\u003cbr\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"INAV","offer_id":47335540326719,"sku":"","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Ardupilot","offer_id":47335540359487,"sku":"","price":19.0,"currency_code":"USD","in_stock":true},{"title":"PX4","offer_id":47335540392255,"sku":"","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir-OPTICAL-FLOW-LIDAR-SENSOR-MTF-02-Compatible-with-Ardupilot-PX4-INAV_png.png?v=1727336024"},{"product_id":"4-in-1-esc-50a-2-6s-mico-air-electronic-speed-controller-bluejay-firmware-with-double-hole-spacing-for-fpv-rc-drone","title":"4 in 1 ESC 50A 2-6s Mico Air Electronic Speed Controller Bluejay Firmware with Double Hole Spacing for FPV RC Drone","description":"\u003cdiv\u003e\u003cb\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh Adaptability Voltage Input Support\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: Suitable for a wide range of voltage inputs from 4-6s, compatible with drones of different sizes and power specifications. From 3-inch mini drones to 7-inch or even larger drones, all can be perfectly matched.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlueJay Firmware Implementation\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: Equipped with the latest version of BlueJay firmware, utilizing up to 48K of default PWM frequency to effectively reduce electrical noise interference with the IMU, significantly improving flight control positioning accuracy in navigation modes. BlueJay also features a user-friendly interface and easy parameter adjustments, greatly simplifying user operation. Additionally, the ESC is compatible with traditional BLS firmware.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh-Performance MOSFET Device\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: The use of 40V 165A RDS=1.1mR MOSFET devices is key to enhancing ESC performance. An RDS(ON) as low as 1.1mR means minimal internal resistance during current flow, not only reducing energy loss and increasing efficiency but also resulting in lower heat generation and better load-bearing capacity. Especially during long periods of high load, it significantly reduces failure rates and extends service life.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWide Compatibility with Control Signal Protocols\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: Supports various control signal protocols including DShot150\/300\/600, as well as bidirectional Dshot and speed feedback functions, ensuring perfect compatibility with most mainstream open-source flight controllers on the market without compatibility concerns.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eExceptional Circuit Design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: The ESC PCB features a 6-layer 2oz thickened copper foil design, not only providing strong overcurrent capability but also significantly improved heat dissipation. Even under long-term high-load conditions, it maintains stable performance and extends the lifespan.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMulti-Specification Fixed Mounting Hole Design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: Provides M4 (30.5*30.5mm) and M3 (20*20mm) mounting hole specifications, offering flexible installation options for drone frames of different sizes, enhancing universality and flexibility.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 2-6S\u003c\/li\u003e\n\u003cli\u003eMaximum Continuous Working Current: 50A\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eESC Firmware: BlueJay 48K\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFirmware Version: v0.19.2\u003c\/li\u003e\n\u003cli\u003eControl Signal Support: DShot150\/300\/600\u003c\/li\u003e\n\u003cli\u003eSupports Bidirectional Dshot, Speed Feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFixed Mounting Holes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eM4-30.5*30.5mm\u003c\/li\u003e\n\u003cli\u003eM3-20*20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMOSFET Specifications: 40V 165A RDS=1.1mR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir 4 in 1 ESC * 1\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eSilicone\u003cb id=\"docs-internal-guid-bf9475c8-7fff-22e9-fd90-544a76b19898\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eWiring *3\u003cbr\u003eCapacitance *1\u003cbr\u003eXT60 Plug * 1\u003cbr\u003eM3 Rubber Mat * 4\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":48043495194943,"sku":"X00480L43V","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/PXL_20240319_091636276.png?v=1727337411"},{"product_id":"micoair-f405-v2-flight-controller-stack-with-4in1-50a-bluejay-48k-esc-fc-esc-support-ardupilot-inav-for-dji-o3-air-unit-fpv","title":"MicoAir F405 V2 Flight Controller Stack with 4in1 50A Bluejay 48K ESC FC\u0026ESC Support Ardupilot\/INAV for DJI O3 Air Unit FPV","description":"\u003cp\u003e\u003cstrong\u003eOpen-Source Flight Control Firmware Compatibility:\u003c\/strong\u003e The MicoAir F405v2 Flight Controller supports two popular open-source flight control firmwares - INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates are easily done through Mission Planner or INAV Configurator.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePioneering Integration of the BMI088 IMU:\u003c\/strong\u003e The MicoAir F405v2 is the first flight controller to incorporate the BMI088 IMU and be compatible with INAV firmware. This IMU is renowned for its excellent stability, high measurement accuracy, and good vibration resistance. Combined with the ESC's BlueJay 48K firmware to reduce electrical noise interference, it can significantly enhance the positioning accuracy of drones in position mode.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSimplified Installation Process:\u003c\/strong\u003e The MicoAir F405v2 offers 6 UARTs, 10 PWM outputs, I2C, SWD, and USB Type-C interfaces, supporting a wide range of external device connections. All interfaces, including the ESC, utilize socket connections, greatly simplifying the installation process and avoiding the complexity and potential issues of soldering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHigh-Performance MOSFET Devices:\u003c\/strong\u003e The ESC uses 40V 165A RDS=1.1mR MOSFET devices, key to enhancing ESC performance. An RDS(ON) as low as 1.1mR means minimal internal resistance during current flow, reducing energy loss, increasing efficiency, and resulting in lower heat generation and better load capacity. Especially during long periods of high load, this significantly lowers failure rates and extends lifespan.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eEnhanced FPV Flying Experience:\u003c\/strong\u003e The flight controller's integrated OSD support and VTX compatibility with the DJI O3 Air Unit, along with the ESC's low-noise characteristics, provide a cleaner power supply for the DJI O3 Air Unit, ensuring good EIS effects.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages of Bundle Purchasing:\u003c\/strong\u003e Integrating the flight controller with the ESC not only ensures perfect compatibility between systems but also simplifies the installation process. Additionally, purchasing the bundle offers a more favorable price than buying each component separately, saving costs.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFlexible Installation and Applicability:\u003c\/strong\u003e The compact and lightweight design of the flight controller and the multi-specification fixed mounting hole design of the ESC provide flexible installation options and broad applicability, thus fitting different sizes and types of drone frames.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFirmware\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eINAV\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir405v2 is officially supported by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eINAV\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efrom version 8.0.0\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also download the old version firmware build by us.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MicoAir405v2\/tree\/main\/Firmware\/INAV\" target=\"_blank\" title=\"Github\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eGithub\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArdupilot\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMicoAir405v2 flight controller board is officially supported by \u003cstrong\u003eArdupilot \u003c\/strong\u003estarting from version 4.5.0, you can update the firmware through \u003cstrong\u003eMission Planner\u003c\/strong\u003e or download all the firmware files(Copter\/Heli\/Plane\/Rover\/etc) here:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/firmware.ardupilot.org\/\"\u003eArduPilot Firmware Download\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso you can use the online firmware builder provided by \u003cstrong\u003eArdupilot \u003c\/strong\u003eto customize your firmware for MicoAir405v2:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/custom.ardupilot.org\/add_build\"\u003eArduPilot Custom Firmware Builder\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e（\u003cspan\u003eFC\u003c\/span\u003e）\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMCU: STM32F405RGT6, 168MHz, 1MB Flash\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIMU: BMI088\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBaro: SPL06\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSD: AT7456E\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMicroSD Card Slot\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6x UART\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10x PWM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x I2C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x SWD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2x ADC (VBAT, Current)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB Type-C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBEC 5V 3A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBEC 9V 3A output (for video transmitter, camera)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUART Mapping\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL0 -\u0026gt; USB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL1 -\u0026gt; UART1 (DMA-enabled)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL2 -\u0026gt; UART2 (DJI-VTX, DMA-enabled)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL3 -\u0026gt; UART3 (GPS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL4 -\u0026gt; UART4 (DMA-enabled)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL5 -\u0026gt; UART5 (ESC Telemetry)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSERIAL6 -\u0026gt; UART6 (RX6 is inverted from SBUS pin, no DMA on TX6)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRC Input\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe default RC input is configured on the UART6_RX inverted from the SBUS pin. Other RC protocols should be applied at other UART port such as \u003cstrong\u003eUART1\u003c\/strong\u003e or \u003cstrong\u003eUART4\u003c\/strong\u003e, and set the protocol to receive RC data: \u003cstrong\u003eSERIALn_PROTOCOL=23\u003c\/strong\u003e and change SERIAL6 _Protocol to something other than ’23’\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eOSD Support\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MicoAir405v2 supports OSD using OSD_TYPE 1 (MAX7456 driver).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eVTX Support\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe SH1.0-6P connector supports a \u003cstrong\u003eDJI O3 Air Unit\u003c\/strong\u003e connection. Pin 1 of the connector is 9v so be careful not to connect this to a peripheral requiring 5v.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePWM Output\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MicoAir405v2 supports up to 10 PWM outputs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChannels 1-8 support DShot.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChannels 1-4 support bi-directional DShot. PWM output share grouped and every group must use the same output protocol:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1,2,5,6 are group 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3, 4 are group 2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e7,8 are group 3\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e9,10 are in group 4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBattery Monitoring\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe voltage sensor can handle up to 6S LiPo batteries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe default battery parameters(for Ardupilot) are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBATT_VOLT_PIN 10\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBATT_CURR_PIN 11\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBATT_VOLT_MULT 21.2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBATT_CURR_SCALE 116.5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCompass\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MicoAir405v2 does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePhysical\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMounting: 30.5 x 30.5mm, Φ4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 36 x 36 x 8 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 9g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications \u003c\/span\u003e（\u003cspan\u003eESC\u003c\/span\u003e）\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eInput Voltage Range: 2-6S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Continuous Working Current: 50A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCurrent Sensor: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eESC Firmware: BlueJay 48K\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFirmware Version: v0.19.2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eControl Signal Support: DShot150\/300\/600\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports Bidirectional Dshot, Speed Feedback\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan\u003eFixed Mounting Holes:\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eM4-30.5*30.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eM3-20*20mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan\u003eMOSFET Specifications: 40V 165A RDS=1.1mR\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePackage List:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMicoAir F405 V2 Flight Controller * 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMicoAir 4 in 1 ESC * 1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e12AWG Wiring *2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eESC Signal Wiring *1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConnecting Wiring *7\u003cbr\u003eCapacitance *1\u003cbr\u003eXT60 Plug * 1\u003cbr\u003eRubber Mat * 8\u003c\/span\u003e\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"INAV","offer_id":48061153509695,"sku":"","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Ardupilot","offer_id":48061153542463,"sku":"","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/DSC01261_2-768x768.webp?v=1711198988"},{"product_id":"micoair-f405-mini-flight-controller-board-20x20mm-with-full-port-enable-and-osd-built-in-supports-betaflight-inav-ardupilot-dji-o3-air-unit-fpv","title":"MicoAir F405 Mini Flight Controller Board 20x20mm \u0026 Bluejay 30A 4in1 ESC with full port enable and OSD built-in, supports Betaflight\/INAV\/ Ardupilot \u0026 DJI O3 Air Unit FPV","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMCU: STM32F405RGT6, 168MHz, 1MB Flash\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIMU: BMI270\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBaro: DPS310\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOSD: AT7456E\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicroSD Card Slot\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6x UART\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e9x PWM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x I2C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x SWD\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB Type-C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBEC 5V 2.5A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBEC 9V 2.5A output (for video transmitter, camera)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUART Mapping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL1 -\u0026gt; UART1 (DMA-enabled)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL2 -\u0026gt; UART2 (DJI-VTX, DMA-enabled)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL3 -\u0026gt; UART3 (GPS)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL4 -\u0026gt; UART4 (DMA-enabled)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL5 -\u0026gt; UART5 (ESC Telemetry)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERIAL6 -\u0026gt; UART6 (RX6 is inverted from SBUS pin, no DMA on TX6)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRC Input\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe default RC input is configured on the UART6_RX inverted from the SBUS pin. Other RC protocols should be applied at other UART port such as UART1 or UART4, and set the protocol to receive RC data: \u003cstrong data-mce-fragment=\"1\"\u003eSERIALn_PROTOCOL=23 \u003c\/strong\u003eand change SERIAL6_Protocol to something other than ’23’\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOSD Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MicoAir405Mini supports OSD using OSD_TYPE 1 (MAX7456 driver).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVTX Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SH1.0-6P connector supports a \u003cstrong data-mce-fragment=\"1\"\u003eDJI O3 Air Unit\u003c\/strong\u003e connection. Pin 1 of the connector is 9v so be careful not to connect this to a peripheral requiring 5v.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePWM Output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MicoAir405Mini supports up to 9 PWM outputs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eChannels 1-8 support DShot.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eChannels 1-4 support bi-directional DShot. PWM outputsare grouped and every group must use the same output protocol:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1,2,5,6 are group 1\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3, 4 are group 2\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e7,8 are group 3\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e9 are in group 4\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBattery Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe voltage sensor can handle up to 6S LiPo batteries.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe default battery parameters(for Ardupilot) are:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBATT_VOLT_PIN 10\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBATT_CURR_PIN 11\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBATT_VOLT_MULT 21.2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBATT_CURR_SCALE 40.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MicoAir405Mini does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting: 20 x 20mm, Φ3.5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 30 x 30 x 8 mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 6g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RoboFusion","offers":[{"title":"Ardupilot \/ Only FC","offer_id":48076445319487,"sku":"","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Ardupilot \/ FC \u0026 ESC","offer_id":49788971614527,"sku":"","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/S9aa0c819efb64d49a6b225aee74ea3ba8.png?v=1727324797"},{"product_id":"mg-a01-gps-module","title":"MG-A01 GNSS Module","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGlobal Navigation System Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e The MG-A01 GNSS module supports major global navigation systems, including GPS, GLONASS, Galileo, and BeiDou. Utilizing the latest technology, it can receive signals from up to 32 satellites simultaneously, providing users with precise and reliable global positioning services.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh-Speed Navigation Update Rate:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Thanks to the special version of the u-blox 10th generation chip—M10050, this module achieves a high navigation update rate of 10Hz, updating position information 10 times per second. This feature makes the MG-A01 ideal for applications in dynamic and rapidly changing environments, such as drone flight and high-speed motion tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt-In High-Gain Antenna:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e The built-in 25 x 25 x 4mm high-gain antenna provides superior signal reception capability for the module. This ensures optimal performance in challenging environments, whether in densely urban areas or in natural settings with dense coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePower-Off Parameter Saving:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e The MG-A01 is equipped with built-in flash memory that can save user settings even when the module is powered off. This means users do not need to reconfigure each time, enabling plug-and-play functionality, significantly enhancing user experience and module convenience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWide Flight Control System Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Compatible with a variety of mainstream flight control software, including INAV, Betaflight, Ardupilot, and PX4. This ensures that the MG-A01 can be easily integrated into a wide range of flight platforms and projects, meeting a broad array of application requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEase of Integration Design:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e The module features a compact design (25 x 25 x 7.8 mm) and lightweight (12g), highlighting its ease of integration. Additionally, we provide a downloadable link for the 3D-printed GPS mount file, allowing users to easily print and install the mount according to their needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIntroduction\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMG-A01(M10 Ultra) \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eGNSS module integrates a special version of u-blox 10th generation receiver chip – M10050, which run with higher frequency than normal, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS\/GLONASS\/Galieo\/BeiDou) and can use up to 32 satellites simultaneously for navigation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe high-gain \u003cstrong data-mce-fragment=\"1\"\u003e25 x 25 x 4mm\u003c\/strong\u003e patch antenna provides the best performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt-in \u003cstrong data-mce-fragment=\"1\"\u003eflash\u003c\/strong\u003e, parameters can still be saved when module lost power.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhy M10 Ultra\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAs we all know, M10 is the latest generation of GNSS receiver, with higher startup speed, positioning accuracy, and more satellites. But at the same time, M10 (5Hz) sacrifices the navigation update rate compared to M8 (10Hz) and M9 (25Hz). In order to solve this problem, we integrated an Ultra version of the M10 chip into MG-A01, which runs with a higher frequency, make it possible to achieve 10Hz navigation update rate while using 32 satellites.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIn order to solve the problem of unstable navigation update rate of M10, the developer team of ardupilot forcibly limited the number of satellite by turning off BeiDou B1L and GLONASS. In fact, they could choose to use the M10 Ultra without making any changes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGNSS Receiver:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-BLOX M10 (M10050)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMagnetic Compass:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e QMC5883L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAntenna: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 25x25x4mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGNSS System Support: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eGPS L1 \/CA; GLONASS L10F; BeiDou B1L\/B1C; Galileo E1B\/C; QZSS L1 C\/A\/S; SBAS L1 C\/A\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConcurrent:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 3 (GPS\/BeiDou\/Galileo(default) or GPS\/GLONASS\/Galileo), when Beidou B1L is turned off, it becomes possible to use 4 satellite systems at the same time: GPS+BeiDou(B1C)+GLONASS+Galileo\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMax Navigation rate:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 10Hz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMax satelite num:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 32\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInput Voltage:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 5V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCurrent:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 30mA\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOutput Interface(GPS): \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eUART (3.3V LVTTL)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInterface(Compass): \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eI2C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUART Baudrate: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e115200(default)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOutput Protocol: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eUBX-PVT(default)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePPS LED:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Blue (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlight Controller Firmware Required\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eINAV:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u0026gt;=5.0.0\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBetaflight:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u0026gt;=4.3.0\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eArdupilot:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u0026gt;=4.3.0\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePX4:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u0026gt;= 1.14.0\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePhysical\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 25 x 25 x 7.8 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 12g\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnector:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e SH1.0-6P 1.0mm pitch\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:6381477\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.thingiverse.com\/thing:6381477\"\u003e3D-printed battery strap GPS mount\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLinks\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/info\/u-center-2-user-guide\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.u-blox.com\/en\/info\/u-center-2-user-guide\"\u003eu-center-2-user-guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/content.u-blox.com\/sites\/default\/files\/u-blox-M10-SPG-5.10_InterfaceDescription_UBX-21035062.pdf\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/content.u-blox.com\/sites\/default\/files\/u-blox-M10-SPG-5.10_InterfaceDescription_UBX-21035062.pdf\"\u003eu-blox-M10-SPG-5.10_InterfaceDescription\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":48216833524031,"sku":"X004GGUY97","price":15.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MG-A01-M10-GPS-25mm-standard-size-with-Compass-QMC5883L-Module-For-FPV-Racing-Drones-Robotics_png.png?v=1727335663"},{"product_id":"lr24-f-2-4g-10km-lora-radio-telemetry-for-pixhawk-ardupilot-px4-plug-and-play","title":"LR24-F 2.4G LoRa Radio Telemetry For Pixhawk\/Ardupilot\/PX4 plug and play","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eLR24-F\u003c\/span\u003e\u003cspan\u003e Telemetry Radio is a small, cheap radio with superior performance for flight controller that typically allows ranges of better than \u003c\/span\u003e\u003cspan\u003e10 kilometers\u003c\/span\u003e\u003cspan\u003e. And it is very suitable for \u003c\/span\u003e\u003cspan\u003ePixhawk\u003c\/span\u003e\u003cspan\u003e or other \u003c\/span\u003e\u003cspan\u003eAudupilot\/PX4\u003c\/span\u003e\u003cspan\u003e flight controller. It will connect automatically when power up without any configuration unless you need to implement some special features.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe LR24-F works in the 2.4GHz, so is better to use 915M receiver (BlackSheep\/ELRS 915) than any other 2.4G receiver on your drones.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eWork in \u003c\/span\u003e\u003cspan\u003e2.4GHz\u003c\/span\u003e\u003cspan\u003e ISM bands\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSmall size and light weight (8g)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eTransmit power up to \u003c\/span\u003e\u003cspan\u003e27dBm (500mW)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eBase on \u003c\/span\u003e\u003cspan\u003eLoRa\u003c\/span\u003e\u003cspan\u003e modulation technology to obtain excellent \u003c\/span\u003e\u003cspan\u003eanti-interference\u003c\/span\u003e\u003cspan\u003e performance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFrequency hopping spread spectrum (FHSS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eUsing \u003c\/span\u003e\u003cspan\u003etransparent transmission\u003c\/span\u003e\u003cspan\u003e to compatible with any data and protocol not just mavlink\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eCP2102\u003c\/span\u003e\u003cspan\u003e USB to UART IC, compatible with \u003c\/span\u003e\u003cspan\u003eQGroundControl\u003c\/span\u003e\u003cspan\u003e on Android\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eData Transmission\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eTransmission Rate:\u003c\/span\u003e\u003cspan\u003e 2.4K Byte\/s (default); 4K Byte\/s; 8K Byte\/s; 20K Byte\/s;\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eMaximum Single-package Length:\u003c\/span\u003e\u003cspan\u003e 20K Byte\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eUart Baudrate for JST-GH Interface:\u003c\/span\u003e\u003cspan\u003e 9600; 19200; 38400; 57600 (default); 115200; 230400; 460800; 500000; 921600\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eUart Baudrate for USB Interface:\u003c\/span\u003e\u003cspan\u003e 57600 (default); 115200; 921600\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePhysical\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eDimensions:\u003c\/span\u003e\u003cspan\u003e 43.4 x 25.8 x 11mm (without antenna)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eWeight:\u003c\/span\u003e\u003cspan\u003e 8g\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eElectrical\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eSupply Voltage:\u003c\/span\u003e\u003cspan\u003e 5V DC (from USB or JST-GH)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eAverage Transmit Current:\u003c\/span\u003e\u003cspan\u003e 400 mA at 27dBm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eSerial Interface:\u003c\/span\u003e\u003cspan\u003e 3.3V UART JST-GH1.25-4P\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eUSB Interface:\u003c\/span\u003e\u003cspan\u003e USB-Type-C (CP2102)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLR24-F will automatically bind and connect to each other after powering on with default setting, the green LED will always on when connection has completed. It can be used for communication between flight controller and ground station software (Mission Planner or QGroundControl) without any settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf some parameters of LR24-F needs to be changed, the MicoAissitant helps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/mega.nz\/folder\/tD9GUDIK#59E8hA3UVYCOhaAVnDxh4Q\"\u003eMicoAssistant\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/mega.nz\/file\/1S1gEBSK#TQB3OHjTWl3n79d49sBd8hrieHrOfr2GeFls9Bu4CCA\"\u003eCP2102 Driver (WIN7\/10\/11)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFollow the tutorial to install the CP2102 driver in windows.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/micoair.com\/index.php\/2024\/03\/31\/installation_guide_for_cp2102_driver_step_by_step\/\"\u003eInstallation Guide for CP2102 Driver Step By Step – MicoAir Tech\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAfter the driver installation is finished, connect the LR24-F to the PC via USB, open the device manager and remember the port number, will need it later.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eManual\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"elementor-heading-title elementor-size-default\"\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_ardupilot\/\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong style=\"color: rgb(43, 0, 255);\"\u003eSetup Tutorial Of Telemetry Radio On Ardupilot\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3 class=\"elementor-heading-title elementor-size-default\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_px4\/\" style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eSetup Tutorial Of Telemetry Radio On PX4\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSetup\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1.\u003c\/span\u003e\u003cspan\u003eOpen the MicoAssitant, choose the correct port number of the radio, click “connect” button with baudrate “57600”.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2.Click the “Radio” icon to open the Radio Setup Page, this will only happen when radio elemetry module has correctly connneted to PC and the driver has been installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou need to click “READ“ button to refresh the params on the first time. Modify the parameters according to your needs，and then click “WRITE” button to write it into module. The new parameters will take effect after re-power on.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNote that once the baudrate is modified, the new baudrate needs to be used the next time you connect.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eParameter Description\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMODE\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDUPLEX (default): Bidirectional communication mode. In this mode, both telemetry can communicate with each other, and only 1-to-1.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBROADCAST_TX: In this mode, the telemetry can only send data, usually use in RTK base station.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBROADCAST_RX: In this mode, the telemetry can only receive data, usually use in RTK rover station.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRATE\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLOW (default)：2.4K Byte\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMID: 4K Byte\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eHIGH: 8K Byte\/s \u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eULTRA HIGH: 20K Byte\/s \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLow-speed mode is enough for flight controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCHAN_MODE\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMANUAL: In this mode, need to setup the working frequency manually, 2400-2482MHz, 1MHz step.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAUTO (default): In this mode, it will work in a frequency automatically with lowest interference.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFHSS_GROUND: FHSS mode for the radio telemetry which connect to PC.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFHSS_AIR：FHSS mode for the radio telemetry which connect to flight controller.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eADDR\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAddress parameter has a range of 1-30000, and default vaule is 1000, telemetry module can only communicate with each other with the same address value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCHANNEL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis parameter can only be set in the “MANUAL” CHAN mode, with a range of 0-82, corresponding to 2400-2482MHz.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBAUDRATE\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBaudrate for the JST-GH port, 9600-921600 can be set, and 57600 is default.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUSB_BAUD\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBaudrate for the USB port, can only be set to 57600 (default) or 115200 or 921600.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePackage Lists\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLR24-F Radio Telemetry * 2\u003c\/li\u003e\n\u003cli\u003e2.4G 3dBi antenna(11cm) * 2\u003c\/li\u003e\n\u003cli\u003e20cm GH1.25-4P to GH1.25-6P Cable (For Pixhawk4\/5\/6) * 1\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i0.804aqesEqesELg\"\u003e20cm GH1.25-4P to MX1.25-6P Cable (For Pixhawk1\/2) * 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":48587238932799,"sku":"X004UAQKTH","price":46.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/DSC01386_2-768x768.webp?v=1714397533"},{"product_id":"micoair-h743-flight-controller","title":"MicoAir H743 V2 Flight Controller supports Ardupilot\/PX4\/INAV\/Betaflight","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32H743VIT6, 480MHz, 2MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: BMI088+BMI270\u003c\/li\u003e\n\u003cli\u003eBaro: SPL06\u003c\/li\u003e\n\u003cli\u003eCompass: QMC5883L\u003c\/li\u003e\n\u003cli\u003eOSD: AT7456E\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Slot\u003c\/li\u003e\n\u003cli\u003e8x UART\u003c\/li\u003e\n\u003cli\u003e11x PWM\u003c\/li\u003e\n\u003cli\u003e1x I2C\u003c\/li\u003e\n\u003cli\u003e1x SWD\u003c\/li\u003e\n\u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli\u003eUSB Type-C\u003c\/li\u003e\n\u003cli\u003eDJI O3\/O4 VTX connector\u003c\/li\u003e\n\u003cli\u003eBEC 5V 3A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli\u003eBEC 12V 3A output (for video transmitter, camera)\u003c\/li\u003e\n\u003cli\u003eBluetooth Telemetry (connected to UART8 internally, baudrate 115200)\u003c\/li\u003e\n\u003cli\u003eVBAT Input Range: 2-6S (6-27V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping (Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003eSERIAL1 -\u0026gt; UART1 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL2 -\u0026gt; UART2 (DisplayPort, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL3 -\u0026gt; UART3 (GPS, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART4 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL5 -\u0026gt; UART5 (DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL6 -\u0026gt; UART6 (\u003cspan class=\"pl-token\"\u003eRCIN\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"pl-token\"\u003eDMA\u003c\/span\u003e–\u003cspan class=\"pl-token\"\u003eenabled\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eSERIAL7-\u0026gt; UART7 (ESC Telemetry, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL8 -\u0026gt; UART8 (\u003cspan class=\"pl-token\"\u003eDMA\u003c\/span\u003e–\u003cspan class=\"pl-token\"\u003eenabled, connected to on board BlueTooth Telemetry\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping (PX4)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003ettyACM0-\u0026gt;USB\u003c\/li\u003e\n\u003cli\u003ettyS0-\u0026gt;TELEM1 -\u0026gt; UART1\u003c\/li\u003e\n\u003cli\u003ettyS1-\u0026gt;GPS2 -\u0026gt; UART2 \u003c\/li\u003e\n\u003cli\u003ettyS2-\u0026gt;GPS1 -\u0026gt; UART3 \u003c\/li\u003e\n\u003cli\u003ettyS3-\u0026gt;TELEM2 -\u0026gt; UART4\u003c\/li\u003e\n\u003cli\u003ettyS4-\u0026gt;TELEM3-\u0026gt; UART5\u003c\/li\u003e\n\u003cli\u003ettyS5-\u0026gt;RC -\u0026gt; UART6\u003c\/li\u003e\n\u003cli\u003ettyS6-\u0026gt;URT6 -\u0026gt; UART7\u003c\/li\u003e\n\u003cli\u003ettyS7-\u0026gt;TELEM4\/SERIAL4 -\u0026gt; UART8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eRC Input (Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe UART6 is compatible with all ArduPilot supported receiver protocols.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePPM is not supported.\u003c\/li\u003e\n\u003cli\u003eSBUS\/DSM\/SRXL connects to the RX6 pin.\u003c\/li\u003e\n\u003cli\u003eFPort requires connection to TX6 . See FPort Receivers.\u003c\/li\u003e\n\u003cli\u003eCRSF also requires a TX6 connection, in addition to RX6, and automatically provides telemetry.\u003c\/li\u003e\n\u003cli\u003eSRXL2 requires a connection to TX6 and automatically provides telemetry. Set SERIAL6_OPTIONS to “4”.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAny UART can also be used for RC system connections in ArduPilot and is compatible with all protocols except PPM. See Radio Control Systems for details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSD Support\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(Ardupilot)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe MicoAir743v2 supports onboard OSD using OSD_TYPE 1 (MAX7456 driver). Simultaneously, DisplayPort OSD is available on the HD VTX connector, See below.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eVTX Support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SH1.0-6P connector supports a DJI Air Unit \/ HD VTX connection. Protocol defaults to DisplayPort. Pin 1 of the connector is 12v so be careful not to connect this to a peripheral requiring 5v.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePWM Output\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp dir=\"auto\"\u003eThe MicoAir743v2 supports up to 11 PWM outputs.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eChannels 1-8 support DShot and bi-directional DShot.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e(currently PX4\u0026amp;INAV not support BDShot function)\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePWM output share grouped and every group must use the same output protocol:\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e1,2,3,4 are group 1\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e5,6 are group 2\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e7,8,11 are group 3\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e9,10 are group 4\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNote: PWM11 is the “LED” pin. If this is configured for serial LED use then PWM 7 and 8 can only be used as serial LED also.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBattery Monitoring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/div\u003e\n\u003cdiv\u003eThe voltage sensor can handle up to 6S LiPo batteries.\u003c\/div\u003e\n\u003cdiv\u003eThe default battery parameters(for Ardupilot) are:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBATT_VOLT_PIN 10\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_PIN 11\u003c\/li\u003e\n\u003cli\u003eBATT_VOLT_MULT 21.2\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_SCALE 40.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eThe MicoAir743v2 has a built-in compass sensor (QMC5883L), and you can also attach an external compass using I2C on the SDA and SCL connector.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, Φ4mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 36 x 36 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePackage List (Only FC）:\u003c\/strong\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMicoAir H743 V2 Flight Controller * 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e4G TF Card *1\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eConnecting Wiring *7\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRubber Mat * 4\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePackage List:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFlight Stack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFC\u0026amp; 50A AM32 ESC:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMicoAir H743 V2 Flight Controller * 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4G TF Card *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMicoAir 4 in 1 50A AM32 ESC * 1 \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e12AWG Wiring *2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eESC Signal Wiring *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eConnecting Wiring *7\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCapacitance *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eXT60 Plug * 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRubber Mat * 8\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFC\u0026amp; 70A AM32 ESC:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMicoAir H743 V2 Flight Controller * 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4G TF Card *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMicoAir 4 in 1 70A AM32 ESC * 1 \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e12AWG Wiring *2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eESC Signal Wiring *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eConnecting Wiring *7\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCapacitance *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eXT60 Plug * 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRubber Mat * 8\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"RoboFusion","offers":[{"title":"Ardupilot \/ Only FC","offer_id":49462277439807,"sku":"","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Ardupilot \/ Flight Stack(FC\u0026 55A AM32 ESC)","offer_id":49865826238783,"sku":null,"price":81.99,"currency_code":"USD","in_stock":true},{"title":"Ardupilot \/ Flight Stack(FC\u0026 70A AM32 ESC)","offer_id":52962703311167,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir743v2-Stack-768x768.webp?v=1778594774"},{"product_id":"open-source-grasshopper5-5-inch-long-range-fpv-frame-kit","title":"Open Source Grasshopper5  5 inch Long Range FPV Frame Kit","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1. Introduction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Grasshopper 5 is a 5-inch FPV frame that allows adjustable angles between the rotor plane and the body, is 3D-printing-friendly, and has excellent compatibility with mainstream FPV drone hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eNot all about science, but all about fun!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2. Grasshopper 5 Design Concept:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eI know that designing a drone with an angled rotor plane is not a novel idea. Many similar designs exist, with DJI FPV being one of the most well-known examples. However, none of these designs cater to DIY enthusiasts or are compatible with the current mainstream FPV hardware. Therefore, I wanted to create a frame where the rotor plane could be angled relative to the body and the angle could be flexibly adjusted using 3D-printed parts. This would make it easier for more people to try out this layout and explore its potential benefits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe design isn't strictly science-based but still exciting to explore.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e3. Features of the Grasshopper 5:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReduces drag generated by the body, improving flight efficiency.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjustable tilt angle (by swapping out two 3D-printed parts) to suit different forward flight speeds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with mainstream open-source flight controllers such as Betaflight, Ardupilot, INAV, and more with simple configuration.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with most mainstream FPV hardware and installation methods.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOptional wings can be added to further increase flight efficiency during forward flight (coming soon).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIntegrated and well-placed sensors like the compass, GPS, TOF, and optical flow to minimize interference, achieving high precision in position control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSupports GPS-based hovering, waypoint flight, autonomous return-to-home, autonomous landing, and optical flow-assisted hovering and position flight.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e4. Application Scenarios for the Grasshopper 5:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSuitable for multirotor drones where forward flight is the primary operating condition.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRequires autonomous positioning capabilities.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLong-range flight.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCarries light payloads that need to face the flight direction.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFPV Freestyle.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eOther unexplored uses...\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e5.Detailed introduction and tutorial：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/robofusion.net\/blogs\/news\/grasshopper-5\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eGrasshopper 5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e6.Recommended Setup:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eFlight Controller\u003c\/span\u003e\u003cspan\u003e: MicoAir H743\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eROBOFUSION:\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/micoair-h743-flight-controller\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMicoAir H743 Flight Controller\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eESC\u003c\/span\u003e\u003cspan\u003e: MicoAir 4-in-1 ESC 50A 2-6s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eROBOFUSION:\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/4-in-1-esc-50a-2-6s-mico-air-electronic-speed-controller-bluejay-firmware-with-double-hole-spacing-for-fpv-rc-drone\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMicoAir 4-in-1 ESC\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eGNSS (GPS)\u003c\/span\u003e\u003cspan\u003e: MicoAir M9 or M10 GNSS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eROBOFUSION:\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/m9-5883-gps-small-size-gnss-module-with-compass-qmc5883l-micoair-tech-mg-903-for-fpv-racing-drones-replace-m9n-5883\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMicoAir M9\/M10 GNSS\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eOptical Flow \u0026amp; Lidar Sensor\u003c\/span\u003e\u003cspan\u003e: MTF-01P\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eROBOFUSION:\u003c\/span\u003e\u003ca href=\"https:\/\/robofusion.net\/products\/optical-flow-lidar-sensor-mtf-01p-compatible-with-ardupilot-px4-inav\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-01P Sensor\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFollow us on \u003cstrong\u003eMakerWorld\u003c\/strong\u003e: \u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca rel=\"noopener\" style=\"color: rgb(43, 0, 255);\" title=\"ROBOFUSION\" href=\"https:\/\/makerworld.com\/en\/@ROBOFUSION\" target=\"_blank\"\u003eROBOFUSION\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"RoboFusion","offers":[{"title":"Grasshopper 5 Kit \/ MicoAir H743 \/ MicoAir 4 in 1  50A","offer_id":49892602544447,"sku":"","price":134.0,"currency_code":"USD","in_stock":false},{"title":"Grasshopper 5 Kit \/ MicoAir H743 \/ NONE","offer_id":49892602577215,"sku":"","price":98.0,"currency_code":"USD","in_stock":false},{"title":"Grasshopper 5 Kit \/ MicoAir F405 V2 \/ MicoAir 4 in 1  50A","offer_id":49892602609983,"sku":"","price":108.0,"currency_code":"USD","in_stock":false},{"title":"Grasshopper 5 Kit \/ MicoAir F405 V2 \/ NONE","offer_id":49892602642751,"sku":"","price":81.0,"currency_code":"USD","in_stock":false},{"title":"Grasshopper 5 Kit \/ NONE \/ MicoAir 4 in 1  50A","offer_id":49892602675519,"sku":"","price":84.0,"currency_code":"USD","in_stock":false},{"title":"Grasshopper 5 Kit \/ NONE \/ NONE","offer_id":49892602708287,"sku":"","price":49.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/PXL_20240917_095054123.LONG_EXPOSURE-01.COVER_4876b5e9-58c9-4cab-bc11-e44666d361df.jpg?v=1729589521"},{"product_id":"optical-flow-lidar-sensor-mtf-01p-compatible-with-ardupilot-px4-inav","title":"OPTICAL FLOW \u0026 LIDAR SENSOR MTF-01P Compatible with Ardupilot\/PX4\/INAV","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTF-01P is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eMTF-01P features an integrated PMW3901 optical flow sensor and a high-performance Laser TOF sensor, which can be used normally in outdoor sunlight environments.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eProduct weight: 8g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eProduct size: 33.2 * 20.8 * 16.8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOutput mode: UART\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOutput frequency: 100Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eTOF Range: 0.02-12m（@90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eAnging dead zone: 2cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eRange accuracy: 4cm (0.02-2m@90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e                            2%(\u0026gt;2m @90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eWavelength: 808nm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eLight source: Laser\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eResistance to ambient light: 70K Lux illumination\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eDistance FOV: 1.5 °\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOptical flow FOV: 42 °\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eAmbient light demand of optical flow:\u0026gt;60Lux\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOptical flow working distance:\u0026gt;80mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003ePower consumption: 500mW\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOperating voltage: 4.0- 5.5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eOperating temperature: - 10 ° C-60 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUSER MANUAL \u0026amp; Configurator\u003c\/strong\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/micoair.com\/optical_range_sensor_mtf-01p\/\" style=\"color: rgb(43, 0, 255);\"\u003eMTF-01P\u003c\/a\u003e\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e(Download MicoAssistant from here)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MTF-01_USER_MANUAL\" style=\"color: rgb(43, 0, 255);\"\u003eGitHub - micoair\/MTF-01_USER_MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e or\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAssistant_v0.9.15_no_chart.exe?v=1706200224\" style=\"color: rgb(43, 0, 255);\"\u003eMicoAssistant_v0.9.15\u003c\/a\u003e\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTutorial\u003c\/strong\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\" style=\"color: rgb(43, 0, 255);\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\/MTF-01P) For Ardupilot\u0026amp;PX4 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\" style=\"color: rgb(43, 0, 255);\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\u003c\/a\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\" style=\"color: rgb(43, 0, 255);\"\u003e\/MTF-01P\u003c\/a\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\" style=\"color: rgb(43, 0, 255);\"\u003e) For INAV6 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\" style=\"color: rgb(43, 0, 255);\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\u003c\/a\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\" style=\"color: rgb(43, 0, 255);\"\u003eMTF-01\u003c\/a\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\" style=\"color: rgb(43, 0, 255);\"\u003e\/MTF-01P) For Ardupilot\u0026amp;PX4 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What are the similarities and differences between the MTF-01, MTF-01P, and MTF-02 sensors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: All three sensors integrate TOF (Time of Flight) and optical flow functions, and they all use the same optical flow module—PMW3901. However, their TOF sensors differ:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eMTF-01\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003eMTF-01P\u003c\/span\u003e\u003cspan\u003e use more powerful TOF sensors, providing a longer range. The MTF-01P also utilizes a laser light source, extending the maximum range to 12 meters, and includes an injection-molded casing.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eMTF-02\u003c\/span\u003e\u003cspan\u003e uses a lower-power TOF sensor, making it ideal for smaller drones where weight and size are critical factors.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: How do I choose the right sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: When selecting a sensor, you can follow these guidelines:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/micoair-optical-flow-lidar-sensor-mtf-02-compatible-with-ardupilot-px4-inav\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-02\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Best suited for small drones of 3 inches or less, as it is compact and lightweight, reducing the burden on your drone.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/mtf-01-integrated-laser-rangefinder-optical-flow-module-for-unmanned-aerial-vehicles-uavs\"\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMTF-01\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Ideal for drones between 3-5 inches or larger, offering the best cost-performance ratio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca href=\"https:\/\/robofusion.net\/products\/optical-flow-lidar-sensor-mtf-01p-compatible-with-ardupilot-px4-inav\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003eMTF-01P\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e: Perfect for drones that require longer range and need to operate in more complex environments, such as low-reflectivity surfaces (e.g., black carpets) or bright light conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe hardware interfaces, protocol settings, and setup methods for different flight controllers are the same for all three sensors, so the setup tutorials on YouTube apply to all of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ: What if I'm still unsure which sensor to choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: If you still have questions about choosing the right sensor, feel free to contact us at \u003c\/span\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePACKAGE LIST\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eMTF-01P module *1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e15cm SH1.0 4PIN-SH1.0 4PIN cable * 1 (for Micoair 405\/743 Flight controller)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4\/5\/6)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003c\/span\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Ardupilot","offer_id":49666558034239,"sku":"","price":31.5,"currency_code":"USD","in_stock":true},{"title":"INAV","offer_id":49666558067007,"sku":"","price":31.5,"currency_code":"USD","in_stock":true},{"title":"PX4","offer_id":49666558099775,"sku":"","price":31.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MTF-01P_1-jpg.webp?v=1724656783"},{"product_id":"10m-lidar-range-sensor-uart-i2c-switchable-supports-ardupilot-px4-inav","title":"10m LiDAR Range Sensor, UART\u0026I2C switchable, supports Ardupilot\/PX4\/INAV","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMT-01P is an  LiDAR Range Sensor developed by MicoAir Technology. It uses UART\u0026amp;I2C  to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eMT-01P features a high-performance Laser TOF sensor, which can be used normally in outdoor sunlight environments.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eProduct weight: 8g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct size: 33.2 * 20.8 * 16.8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutput mode: UART\/I2C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutput frequency: 100Hz-5Hz Adjustable （default 50Hz)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTOF Range: 0.02-10m（@90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnging dead zone: 2cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRange accuracy: 4cm (0.02-2m@90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e                           2%(\u0026gt;2m @90% Reflectivity）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWavelength: 808nm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLight source: Laser\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResistance to ambient light: 70K Lux illumination\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDistance FOV: 1.5 °\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower consumption: 500mW\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating voltage: 5.0V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating temperature: - 10 ° C-60 °C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUSER MANUAL \u0026amp; Configurator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/micoair.com\/optical_range_sensor\/\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003eMT-01P\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e(Download MicoAssistant from here)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MTF-01_USER_MANUAL\" style=\"color: rgb(43, 0, 255);\"\u003eGitHub - micoair\/MTF-01_USER_MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e or\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAssistant_v0.9.15_no_chart.exe?v=1706200224\" style=\"color: rgb(43, 0, 255);\"\u003eMicoAssistant_v0.9.15\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePACKAGE LIST\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eMT-01P module *1 (Default Mavlink protocol）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e15cm SH1.0 4PIN-SH1.0 4PIN cable * 1 (for Micoair 405\/743 Flight controller)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003e20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4\/5\/6)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003c\/span\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Ardupilot","offer_id":49758744183103,"sku":"","price":21.5,"currency_code":"USD","in_stock":true},{"title":"PX4","offer_id":49758744215871,"sku":"","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/O1CN01bL3NkX2MmyXiY2cOp__1063429871_png.webp?v=1726646658"},{"product_id":"micoair-915mhz-long-range-lora-telemetry-for-drones-and-robotics-lr900-a-data-transmit-module-for-pixhawk-ardupilot-px4","title":"Micoair 915MHz Long-Range LoRa Telemetry For Drones and Robotics\/ LR900-A \/ Data Transmit Module For Pixhawk\/Ardupilot\/PX4","description":"\u003ch1\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLR900-A\/F\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTelemetry Radio is a small, cheap radio with superior performance for flight controller that typically allows ranges of better than 30kilometers. And it is very suitable for Pixhawk or other Audupilot\/PX4 flight controller. It will connect automatically when power up without any configuration unless you need to implement some special features.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe LR900-A\/F works in the 915MHz, so is better to use 2.4GHz receiver than 915MHz receiver (BlackSheep\/ELRS 915) on your drones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.7370RbznRbznXy\"\u003e\u003cstrong\u003eUser Mannual:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i2.7370RbznRbznXy\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"micoair.com\/radio_telemetry_lr900f\/\" target=\"_blank\" style=\"color: rgb(43, 0, 255);\" rel=\"noopener\"\u003emicoair.com\/radio_telemetry_lr900f\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTutorial:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eSetup Tutorial Of Telemetry Radio On Ardupilot\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i3.7370RbznRbznXy\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"micoair.com\/setup_tutorial_of_telemetry_radio_on_ardupilot\/\" target=\"_blank\" style=\"color: rgb(43, 0, 255);\" rel=\"noopener\"\u003emicoair.com\/setup_tutorial_of_telemetry_radio_on_ardupilot\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eSetup Tutorial Of Telemetry Radio On PX4\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i4.7370RbznRbznXy\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"micoair.com\/setup_tutorial_of_telemetry_radio_on_px4\/\" target=\"_blank\" style=\"color: rgb(43, 0, 255);\" rel=\"noopener\"\u003emicoair.com\/setup_tutorial_of_telemetry_radio_on_px4\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifference Between LR900-F and LR900-A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum Transmit power of LR900-F is 27dBm and LR900-A is 22dBm.\u003c\/p\u003e\n\u003cp\u003eLR900-F use CP2102 USB to UART chip while LR900-A use CH340, Therefore, LR900-A cannot use the Android version of Mission Planner.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Lists\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLR900-A Telemetry Radio Module * 2\u003c\/p\u003e\n\u003cp\u003e915M 2dBi antenna(11cm) * 2\u003c\/p\u003e\n\u003cp\u003e20cm GH1.25-4P to GH1.25-6P Cable (For Pixhawk4\/5\/6) * 1\u003c\/p\u003e\n\u003cp\u003e20cm GH1.25-4P to MX1.25-6P Cable (For Pixhawk1\/2) * 1\u003c\/p\u003e\n\u003cp\u003e20cm GH1.25-4P to SH1.0-4P Cable (For MicoAir405\/743) * 1\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":49789451895103,"sku":"","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/PXL_20240430_160638305.png?v=1727336847"},{"product_id":"micoair-optical-flow-range-sensor-mtf-02p-compatible-with-ardupilot-px4-inav","title":"MicoAir Optical Flow \u0026 Range Sensor MTF-02P Compatible with Ardupilot\/PX4\/INAV","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Interface\u003c\/strong\u003e: UART\/115200\/LVTTL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol\u003c\/strong\u003e: Micolink\/Mavlink\/MSP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Rate\u003c\/strong\u003e: 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Supported\u003c\/strong\u003e: Ardupilot\/PX4\/INAV\/FMT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTOF Range\u003c\/strong\u003e: 6m@90% reflectance\/1K Lux; 4m@90% reflectance\/70K Lux;\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv align=\"start\"\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.7ea87bb4MBQjnW\"\u003e\u003cstrong\u003eCenter Wavelength\u003c\/strong\u003e: 940nm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv align=\"start\"\u003e\u003cspan\u003e\u003cstrong\u003eEmitting Angle\u003c\/strong\u003e: 2 °\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead Zone\u003c\/strong\u003e: 2cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRanging Accuracy\u003c\/strong\u003e: 2cm(\u0026lt;2m@90% reflectance); 1.5%(\u0026gt;2m@90% reflectance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Flow FOV\u003c\/strong\u003e: 42\u003cspan\u003e °\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Speed Measurement\u003c\/strong\u003e: 7m\/s@1m height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Light Demand of Optical Flow\u003c\/strong\u003e: \u0026gt;60Lux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Flow Working Distance\u003c\/strong\u003e: \u0026gt;8cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption\u003c\/strong\u003e: 200mW (40mA@5V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage\u003c\/strong\u003e: 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eMTF-02P supports multiple serial protocols such as Micolink\/Mavlink\/MSP, and is compatible with mainstream open-source flight controllers such as Ardupilot, PX4, INAV, etc.\u003c\/p\u003e\n\u003cp\u003eYou can easily switch its protocol by bridging the jumper on the back of the board.\u003c\/p\u003e\n\u003cp\u003eThe module protocol can also be switched using MicoAssistant, however, the jumper configuration takes precedence.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 21.6 x 16 x 6.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eSensor 3D file\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/grabcad.com\/library\/micoair-optical-flow-range-sensor-mtf-02p-compatible-with-ardupilot-px4-inav-1\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003eMTF-02P 3D File\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSensor Case (Designed by ROBOFUSION)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" href=\"https:\/\/grabcad.com\/library\/micoair-optical-flow-range-sensor-mtf-02p-compatible-with-ardupilot-px4-inav-sensor-case-1\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGrabCAD--MTF-02 Sensor Case\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/makerworld.com\/en\/models\/704804#profileId-634637\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMakerWord--MTF-02 Sensor Case\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eUSER MANUAL \u0026amp; Configurator\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" href=\"https:\/\/micoair.com\/optical_range_sensor_mtf-02p\/\" target=\"_blank\"\u003eMTF-02P\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e(Download MicoAssistant from here)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" href=\"https:\/\/github.com\/micoair\/MTF-01_USER_MANUAL\" target=\"_blank\"\u003eGitHub - micoair\/MTF-01_USER_MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e or\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAssistant_v0.9.15_no_chart.exe?v=1706200224\" target=\"_blank\"\u003eMicoAssistant_v0.9.15\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eTutorial\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\/MTF-01P) For Ardupilot\u0026amp;PX4 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\u003c\/a\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\"\u003e\/MTF-01P\u003c\/a\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\"\u003e) For INAV6 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\"\u003eSetup Optic Flow\u0026amp;Lidar(MTF-01\u003c\/a\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=bEKm-PGRnks\"\u003eMTF-01\u003c\/a\u003e\u003ca style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/www.youtube.com\/watch?v=D-ooFHEtQoo\u0026amp;t=1s\"\u003e\/MTF-01P) For Ardupilot\u0026amp;PX4 To Make Drones Hover And Fly Indoors Better (youtube.com)\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePACKAGE LIST\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i6.5f1fMn2tMn2txV\"\u003eMTF-02P module *1\u003c\/p\u003e\n\u003cp\u003e20cm SH1.0 4PIN-4PIN cable * 1 \u003c\/p\u003e\n\u003cp\u003e20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.5f1fMn2tMn2txV\"\u003e20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4\/5\/6)\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.5f1fMn2tMn2txV\"\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eT\u003c\/strong\u003e\u003cstrong\u003eechnical Support\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eIf you encounter any usage issues or require technical support after receiving your product, please feel free to contact us. You can reach us via email at \u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003einfo@robofusion.net\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur technical support team will respond to your inquiry within 48 hours. We promise to provide you with professional solutions to ensure you make the most out of our products.\u003c\/p\u003e\n\u003cp\u003eWe also welcome any feedback or suggestions you may have regarding our products. Your input is invaluable to us and will help us continually improve and enhance our products and services.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":49864049066303,"sku":"X00501TZGZ","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir-Optical-Flow-Range-Sensor-MTF-02P-Compatible-with-Ardupilot-PX4-INAV.png__2.png?v=1728963981"},{"product_id":"micoair-trs-tx-module-receiver-2-4g-long-range-telemetry-radiorc-2in1-system","title":"Micoair TRS TX Module \u0026 Receiver 2.4G Long-Range Telemetry \u0026 Radio(RC) 2IN1 System","description":"\u003cp\u003e\u003cstrong\u003eHigh quality radio control link and data link built in together, base on 2.4G LoRa, 1W RF outuput\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4GHz\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eISM bands\u003c\/li\u003e\n\u003cli\u003eTransmit power up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e30dBm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(1000mW)\u003c\/li\u003e\n\u003cli\u003eBase on \u003cstrong\u003eLoRa\u003c\/strong\u003e modulation technology to obtain excellent \u003cstrong\u003eanti-interference\u003c\/strong\u003e performance\u003c\/li\u003e\n\u003cli\u003eFrequency hopping spread spectrum (FHSS)\u003c\/li\u003e\n\u003cli\u003eData link rate up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e8KB\/s\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRadio controler refresh rate up to \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e150Hz\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eQGroundControl\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon Android\u003c\/li\u003e\n\u003cli\u003eBuilt in\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor communication with phone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNANO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesigned, compatible with most of compact radio controller such as radiomaster pocket, jumper t-pro, etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e  \u003cspan style=\"color: rgb(43, 0, 255);\"\u003e \u003ca style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" title=\"TRS TX Module \u0026amp; Receiver\" href=\"https:\/\/micoair.com\/trs_tx_module_receiver\/\" target=\"_blank\"\u003eTRS TX Module \u0026amp; Receiver\u003c\/a\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eReceiver\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax RF Power:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e27dBm (500mW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicator\u003c\/strong\u003e: solid on when connected; blinks slowly when disconected; blinks rapidly in matching  status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBind Button:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKeep the button pressed and power on to enter binding mode, the LED will blink rapidly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Bind TRS Devices Together\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEP1:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKeep the bind button on the receiver pressed and power on to enter binding mode, the LED will blink rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEP2:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eReboot the radio controller with TRS tx module, the tx module and receiver will bind together within few seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTX  Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 76.8 x 40 x 18.7 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 32g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 24 x 18.2 x 5.8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePackage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTRS TX Module *1\u003c\/li\u003e\n\u003cli\u003eReceiver *1\u003c\/li\u003e\n\u003cli\u003eT- antenna (for receiver) *1\u003c\/li\u003e\n\u003cli\u003e2dBi antenna (for TX Module) *1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"TRS TX Module \u0026 Receiver","offer_id":51053660733759,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/TRS_3-1024x1024.webp?v=1750856920"},{"product_id":"micoair-h743-aio-35a-am32-25-5-25-5-3-6s-flight-controller-esc","title":"MicoAir H743 AIO 35A AM32 25.5×25.5 3-6S Flight Controller \u0026 ESC","description":"\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eFlight Controller\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32H743VIH6, 480MHz, 2MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: BMI088+BMI270\u003c\/li\u003e\n\u003cli\u003eBaro: DPS310\u003c\/li\u003e\n\u003cli\u003eTF Card Slot\u003c\/li\u003e\n\u003cli\u003e7x UART\u003c\/li\u003e\n\u003cli\u003e8x PWM\u003c\/li\u003e\n\u003cli\u003e1x I2C\u003c\/li\u003e\n\u003cli\u003e1x SWD\u003c\/li\u003e\n\u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli\u003e1x LED Strip\u003c\/li\u003e\n\u003cli\u003e1x Beeper\u003c\/li\u003e\n\u003cli\u003eUSB Type-C\u003c\/li\u003e\n\u003cli\u003eBEC 5V 2A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli\u003eBEC 12V 2A output (for DJI O3\/Vista)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eESC\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca class=\"transition-all hover:text-red-500 text-red-500\" href=\"https:\/\/am32.ca\/configurator\" rel=\"noopener noreferrer\" download=\"AM32_MICOAIR_743_AIO_F421_2.17.hex\" target=\"_blank\"\u003eAM32_MICOAIR_743_AIO_F421_2.17\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM Freq\u003c\/strong\u003e: 48KHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC Protocol\u003c\/strong\u003e: PWM\/DShot300\/DShot600 (support BDShot)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current\u003c\/strong\u003e: 35A * 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Support\u003c\/strong\u003e: 3-6S (8.5V-27V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"betterdocs-entry-title\" class=\"betterdocs-entry-title\"\u003e\u003cspan\u003e\u003ca href=\"https:\/\/micoair.com\/docs\/how-to-configure-and-update-am32-esc-on-micoair743-aio\/\"\u003eTutorial: How to Configure and Update AM32 ESC on MicoAir743-AIO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping (Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003eSERIAL1 -\u0026gt; UART1 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL2 -\u0026gt; UART2 (VTX-HD, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL3 -\u0026gt; UART3 (GPS, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART4 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL5 -\u0026gt; UART6 (\u003cspan class=\"pl-token\"\u003eRCIN\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"pl-token\"\u003eDMA\u003c\/span\u003e–\u003cspan class=\"pl-token\"\u003eenabled\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eSERIAL6-\u0026gt; UART7 (ESC Telemetry, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL7 -\u0026gt; UART8 (\u003cspan class=\"pl-token\"\u003eDMA\u003c\/span\u003e–\u003cspan class=\"pl-token\"\u003eenabled\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eUART Mapping (PX4)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ettyACM0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003ettyS0 -\u0026gt; TELEM1 -\u0026gt; UART1\u003c\/li\u003e\n\u003cli\u003ettyS1 -\u0026gt; TELEM2 -\u0026gt; UART2\u003c\/li\u003e\n\u003cli\u003ettyS2 -\u0026gt; GPS1 -\u0026gt; UART3 \u003c\/li\u003e\n\u003cli\u003ettyS3 -\u0026gt; TELEM3-\u0026gt; UART4\u003c\/li\u003e\n\u003cli\u003ettyS4 -\u0026gt; RC -\u0026gt; UART6\u003c\/li\u003e\n\u003cli\u003ettyS5 -\u0026gt; ESC -\u0026gt; UART7\u003c\/li\u003e\n\u003cli\u003ettyS6 -\u0026gt; TELEM4 -\u0026gt; UART8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eRC Input (Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe default RC input is configured on the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"x x-first x-last\"\u003eUART6. The SBUS pin is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003einverted\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"x x-first x-last\"\u003eand connected to RX6. Non\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003eSBUS\u003cspan class=\"x x-first x-last\"\u003e, single wire serial inputs can be directly tied to RX6 if SBUS\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003epin\u003cspan class=\"x x-first x-last\"\u003e\u003cspan\u003e \u003c\/span\u003eis left unconnected. RC could\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003ebe applied\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"x x-first x-last\"\u003einstead\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003eat\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"x x-first x-last\"\u003ea different\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUART port such as UART2, UART4 or UART8, and set the protocol to receive RC data:\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan class=\"pl-c1\"\u003eSERIALn_PROTOCOL=23\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e and change\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eSERIAL5\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"pl-s\"\u003e_\u003c\/span\u003eProtocol\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto something other than\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003e23\u003c\/code\u003e.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eOSD Support  (Ardupilot)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe MicoAir743-AIO supports OSD using OSD_TYPE 5 (MSP_DISPLAYPORT).\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eVTX Support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe SH1.0-6P connector supports a DJI Air Unit\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"x x-first x-last\"\u003e\/ HD VTX\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003econnection\u003cspan class=\"x x-first x-last\"\u003e. Protocol defaults to DisplayPort\u003c\/span\u003e. Pin 1 of the connector is 12v so be careful not to connect this to a peripheral requiring 5v.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePWM Output\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp dir=\"auto\"\u003eThe MicoAir743-AIO supports up to 8 PWM outputs.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eChannels 1-8 support DShot\/bi-directional DShot.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e(currently PX4\u0026amp;INAV not support BDShot function)\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePWM output share grouped and every group must use the same output protocol:\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e1,2,3,4 are group 1\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e5, 6 are group 2\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e7,8 are group 3\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe MicoAir743-AIO doesn’t have a built-in compass sensor, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: 25.5 x 25.5mm, Φ3mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 36 x 36 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"RoboFusion","offers":[{"title":"Ardupilot","offer_id":51068928852287,"sku":null,"price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/Screenshot_2025-07-02_105441.png?v=1751462737"},{"product_id":"servomy-sds1901-sg90-mg90s-mini-size-180-degree-hv-digital-coreless-servo","title":"SERVOMY SDS1901 SG90\/MG90S Mini Size, 180 Degree HV Digital Coreless Servo","description":"\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRC car steering\u003c\/li\u003e\n  \u003cli\u003eCompact RC platforms\u003c\/li\u003e\n  \u003cli\u003eFixed-wing aircraft control surfaces\u003c\/li\u003e\n  \u003cli\u003eMicro helicopter linkages\u003c\/li\u003e\n  \u003cli\u003eRobotics and DIY motion control\u003c\/li\u003e\n  \u003cli\u003ePan-tilt mechanisms and small actuators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\n  The SERVOMY SDS1901 is a 9g-size(19G ACTUAL WEIGHT) micro servo built for users who need standard micro-servo mounting compatibility, higher voltage support, and stronger mechanical construction than entry-level plastic micro servos. It is designed to fit common 9g-size installation spaces while offering a full metal case, metal gears, digital control, and a coreless motor in a compact format.\n\u003c\/p\u003e\n\u003cp\u003e\n  With an operating voltage range of 5.0V to 8.4V, the SDS1901 works with common 5V, 6V, 7.4V, and 8.4V setups. At 8.4V, it provides up to 9.2 kgf·cm stall torque and 0.07 sec\/60° speed. For RC car steering, small aircraft control surfaces, helicopter mechanisms, robotic joints, and pan-tilt assemblies, these are practical, meaningful specifications rather than marketing-only claims.\n\u003c\/p\u003e\n\u003cp\u003e\n  The digital control system uses PWM input, with a recommended operating pulse width of 1000-2000 μs and an input range of 500-2500 μs. Combined with a 2 μs dead band, 1520 μs neutral signal, and up to 333 Hz refresh rate, the servo is built for responsive command tracking and steady centering behavior.\n\u003c\/p\u003e\n\u003cp\u003e\n  Mechanically, the SDS1901 uses a full metal case, metal gears, 1 ball bearing, a 390:1 reduction ratio, and a 21T 4.9 mm output spline. The servo dimensions are 24 x 12 x 22 mm, with a weight of 19 g and a lead length of 310 ± 10 mm using 26 AWG wire. An aluminum servo horn is included in the package for added installation value.\n\u003c\/p\u003e\n\u003cp\u003e\n  This model is intended for users who want a compact servo that fits common 9g-size mounting spaces but need a more robust build and broader voltage compatibility than basic micro servo options.\n\u003c\/p\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cp\u003e\n  Model: SDS1901\u003cbr\u003e\n  Servo Type: Digital Micro Servo\u003cbr\u003e\n  Motor Type: Coreless\u003cbr\u003e\n  Operating Voltage: DC 5.0V-8.4V\u003cbr\u003e\n  Dimensions: 24 x 12 x 22 mm\u003cbr\u003e\n  Weight: 19 g\u003cbr\u003e\n  Case Material: Full Metal\u003cbr\u003e\n  Gear Material: Metal\u003cbr\u003e\n  Bearing: 1 Ball Bearing\u003cbr\u003e\n  Output Spline: 21T, 4.9 mm\u003cbr\u003e\n  Wire Length: 310 ± 10 mm\u003cbr\u003e\n  Wire Gauge: 26 AWG\u003cbr\u003e\n  Signal Wire: Yellow\u003cbr\u003e\n  Positive Wire: Red\u003cbr\u003e\n  Negative Wire: Brown\u003cbr\u003e\n  Control System: PWM\u003cbr\u003e\n  Recommended Pulse Width: 1000-2000 μs\u003cbr\u003e\n  Input Pulse Range: 500-2500 μs\u003cbr\u003e\n  Dead Band Width: 2 μs\u003cbr\u003e\n  Neutral \/ Refresh Rate: 1520 μs \/ 333 Hz\u003cbr\u003e\n  Rotation Direction: Forward \/ Reverse\u003cbr\u003e\n  Waterproof: No\u003cbr\u003e\n  Operating Temperature: -10°C to 50°C\u003cbr\u003e\n  Reduction Ratio: 390:1\u003cbr\u003e\n  Angle Sensor: Potentiometer\n\u003c\/p\u003e\n\n\u003ch3\u003eSpeed（No-Load Speed）:\u003c\/h3\u003e\n\u003cp\u003e\n  5.0V: 0.16 sec\/60°\u003cbr\u003e\u003cbr\u003e\n  6.0V: 0.13 sec\/60°\u003cbr\u003e\u003cbr\u003e\n  7.4V: 0.09 sec\/60°\u003cbr\u003e\u003cbr\u003e\n  8.4V: 0.07 sec\/60°\n\u003c\/p\u003e\n\n\u003ch3\u003eStall Torque:\u003c\/h3\u003e\n\u003cp\u003e\n  5.0V: 6.8 kgf·cm\u003cbr\u003e\u003cbr\u003e\n  6.0V: 7.5 kgf·cm\u003cbr\u003e\u003cbr\u003e\n  7.4V: 8.0 kgf·cm\u003cbr\u003e\u003cbr\u003e\n  8.4V: 9.2 kgf·cm\n\u003c\/p\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e\n  1 x SDS1901 Micro Servo\u003cbr\u003e\u003cbr\u003e\n  1 x Aluminum Servo Horn\u003cbr\u003e\u003cbr\u003e\n  1 x Servo Accessories Set\n\u003c\/p\u003e\n","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":52508376596799,"sku":"X00525CZO3","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/1.png?v=1774032996"},{"product_id":"micoair-70a-4-in-1-am32-esc-for-fpv-drones","title":"MicoAir 70A 4-in-1 AM32 ESC for FPV Drones","description":"\n\u003cp\u003e\n  The MicoAir 70A 4-in-1 ESC is a high-current electronic speed controller designed for FPV drones, freestyle builds, racing drones, and demanding multirotor applications. It features 32-bit AM32 firmware, 3–6S LiPo support, 70A x4 rated output, and modern digital throttle protocol compatibility.\n\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e32-bit AM32 Firmware:\u003c\/strong\u003e Provides smooth motor control, fast response, and flexible ESC configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e70A x4 Rated Output:\u003c\/strong\u003e Designed for high-power multirotor builds requiring strong current handling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3–6S LiPo Support:\u003c\/strong\u003e Compatible with a wide range of FPV and UAV power systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtocol Support:\u003c\/strong\u003e Supports PWM, DShot300, DShot600, and Bi-directional DShot.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Resistance MOSFETs:\u003c\/strong\u003e Uses 40V 0.95mΩ metal-packaged MOSFETs for improved power efficiency and thermal performance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e8-Layer 2oz PCB:\u003c\/strong\u003e Built with an 8-layer 2oz copper PCB and copper busbar design for better current flow and heat distribution.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in Current Sensor:\u003c\/strong\u003e Allows compatible flight controllers to monitor power consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct Name\u003c\/th\u003e\n      \u003ctd\u003eMicoAir 70A 4-in-1 ESC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eFirmware\u003c\/th\u003e\n      \u003ctd\u003e32-bit AM32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eInput Voltage\u003c\/th\u003e\n      \u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCurrent Rating\u003c\/th\u003e\n      \u003ctd\u003e70A x4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eControl Protocols\u003c\/th\u003e\n      \u003ctd\u003ePWM, DShot300, DShot600\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eTelemetry Support\u003c\/th\u003e\n      \u003ctd\u003eBi-directional DShot\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMOSFET\u003c\/th\u003e\n      \u003ctd\u003e40V 0.95mΩ metal-packaged MOSFET\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePCB Design\u003c\/th\u003e\n      \u003ctd\u003e8-layer 2oz copper PCB with copper busbar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCurrent Sensor\u003c\/th\u003e\n      \u003ctd\u003eBuilt-in\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFPV freestyle drones\u003c\/li\u003e\n  \u003cli\u003eRacing drones\u003c\/li\u003e\n  \u003cli\u003eLong-range multirotors\u003c\/li\u003e\n  \u003cli\u003eCinematic FPV platforms\u003c\/li\u003e\n  \u003cli\u003eCustom UAV and robotics projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\n","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":52858730217791,"sku":null,"price":59.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir-70A-4IN1.webp?v=1777123114"},{"product_id":"micoair743v2-aio-45a","title":"MicoAir743v2-AIO-45A","description":"\u003ch2\u003eMicoAir743v2 AIO Flight Controller\u003c\/h2\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/micoair.com\/flightcontroller_micoair743v2_aio_45a\/\" target=\"_blank\"\u003eProduct Manual: Click here to view the full product guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\n\u003ch3\u003ePlease note: The default firmware pre-installed is ArduPilot.\u003c\/h3\u003e\n    \u003cul\u003e\n\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eFlight Controller Specifications\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMCU: STM32H743VIH6, 480MHz, 2MB Flash\u003c\/li\u003e\n      \u003cli\u003eIMU: BMI088 + BMI270\u003c\/li\u003e\n      \u003cli\u003eBaro: SPL06\u003c\/li\u003e\n      \u003cli\u003eTF Card Slot\u003c\/li\u003e\n      \u003cli\u003e7x UART\u003c\/li\u003e\n      \u003cli\u003e9x PWM\u003c\/li\u003e\n      \u003cli\u003e1x I2C\u003c\/li\u003e\n      \u003cli\u003e1x SWD\u003c\/li\u003e\n      \u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n      \u003cli\u003e1x LED Strip\u003c\/li\u003e\n      \u003cli\u003e1x Beeper\u003c\/li\u003e\n      \u003cli\u003eUSB Type-C\u003c\/li\u003e\n      \u003cli\u003eBEC 5V 2A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n      \u003cli\u003eBEC 12V 2A output (for DJI O3\/O4\/O4 Pro)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eESC Specifications\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFirmware: \u003ca href=\"https:\/\/am32.ca\/configurator\" target=\"_blank\"\u003eAM32_F4A_4IN1_F421_2.17\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003ePWM Frequency: 48KHz\u003c\/li\u003e\n      \u003cli\u003eESC Protocol: PWM \/ DShot300 \/ DShot600 (support BDShot)\u003c\/li\u003e\n      \u003cli\u003eContinuous Current: 45A × 4\u003c\/li\u003e\n      \u003cli\u003eVoltage Support: 2-6S (5.6V - 27V)\u003c\/li\u003e\n      \u003cli\u003e\u003ca href=\"https:\/\/micoair.com\/docs\/how-to-configure-and-update-am32-esc-on-micoair743-aio\/\" target=\"_blank\"\u003eTutorial: How to Configure and Update AM32 ESC on MicoAir743-AIO\u003c\/a\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eUART Mapping\u003c\/h3\u003e\n    \u003cp\u003e\u003cstrong\u003eArdupilot:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eSERIAL0 → USB\u003c\/li\u003e\n      \u003cli\u003eSERIAL1 → UART1 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL2 → UART2 (DisplayPort, DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL3 → UART3 (GPS, DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL4 → UART4 (MAVLink2, DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL5 → UART5 (DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL6 → UART6 (RCIN, DMA-enabled)\u003c\/li\u003e\n      \u003cli\u003eSERIAL8 → UART8 (DMA-enabled)\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003ePX4:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ettyACM0 → USB\u003c\/li\u003e\n      \u003cli\u003ettyS0 → TELEM1 → UART1\u003c\/li\u003e\n      \u003cli\u003ettyS1 → GPS2 → UART2\u003c\/li\u003e\n      \u003cli\u003ettyS2 → GPS1 → UART3\u003c\/li\u003e\n      \u003cli\u003ettyS3 → TELEM2 → UART4\u003c\/li\u003e\n      \u003cli\u003ettyS4 → TELEM3 → UART5\u003c\/li\u003e\n      \u003cli\u003ettyS5 → RC → UART6\u003c\/li\u003e\n      \u003cli\u003ettyS7 → TELEM4\/SERIAL4 → UART8\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eRC Input (Ardupilot)\u003c\/h3\u003e\n    \u003cp\u003eThe default RC input is configured on UART6. The SBUS pin is inverted and connected to RX6. Non-SBUS, single-wire serial inputs can be tied directly to RX6 if the SBUS pin is left unconnected. RC can also be used on UART2, UART4, or UART8 by setting SERIALn_PROTOCOL=23 and changing SERIAL6_PROTOCOL to a different value.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eOSD Support (Ardupilot)\u003c\/h3\u003e\n    \u003cp\u003eSupports OSD using OSD_TYPE 5 (MSP_DISPLAYPORT).\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eVTX Support\u003c\/h3\u003e\n    \u003cp\u003eSH1.0-6P connector supports DJI Air Unit \/ HD VTX connection (DisplayPort protocol). Pin 1 supplies 12V — ensure compatibility before connecting devices that require 5V.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003ePWM Output\u003c\/h3\u003e\n    \u003cp\u003eSupports up to 9 PWM outputs.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eChannels 1–8 support DShot and bi-directional DShot (BDShot)\u003c\/li\u003e\n      \u003cli\u003eNote: PX4 \u0026amp; INAV currently do not support BDShot\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003eOutput Groups:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eGroup 1: PWM 1, 2, 3, 4\u003c\/li\u003e\n      \u003cli\u003eGroup 2: PWM 5, 6\u003c\/li\u003e\n      \u003cli\u003eGroup 3: PWM 7, 8, 11 (Note: PWM11 is LED. If used for serial LED, PWM7 and PWM8 must also be used for LEDs)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003eCompass\u003c\/h3\u003e\n    \u003cp\u003eNo built-in compass. External compass can be connected via I2C on SDA\/SCL.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003ePhysical\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMounting: 25.5 × 25.5mm, Φ3mm\u003c\/li\u003e\n      \u003cli\u003eDimensions: 36 × 36 × 8mm\u003c\/li\u003e\n      \u003cli\u003eWeight: 10g\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"section\"\u003e\n    \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eH743V2 AIO (Ardupilot firmware） ×1\u003c\/li\u003e\n      \u003cli\u003e4G TF Memory Card ×1\u003c\/li\u003e\n      \u003cli\u003e220uF Electrolytic Capacitor ×1\u003c\/li\u003e\n      \u003cli\u003eXT30 Power Cable ×1\u003c\/li\u003e\n      \u003cli\u003eM2 × 6.6mm Silicone Dampening Sleeves ×4\u003c\/li\u003e\n      \u003cli\u003eSH1.0-6P Cable 20cm (For GPS) ×2\u003c\/li\u003e\n      \u003cli\u003eSH1.0-4P Cable 15cm (For FC) ×1\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":52962806399295,"sku":"X004PXDROP","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MicoAir743v2-AIO-45A-Top.jpg?v=1778596188"},{"product_id":"microair-4in1-bluejay-33a-esc","title":"MicroAir 4IN1 Bluejay 33A ESC","description":"\u003cdiv class=\"elementor-element elementor-element-4172a5c elementor-widget elementor-widget-heading\" data-id=\"4172a5c\" data-element_type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch4 class=\"elementor-heading-title elementor-size-default\"\u003eBluejay-4IN1-33A\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-c0d81dc elementor-widget elementor-widget-text-editor\" data-id=\"c0d81dc\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware\u003c\/strong\u003e: Bluejay_0.19.2_JH40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM Freq\u003c\/strong\u003e: 48KHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC Protocol\u003c\/strong\u003e: DShot300\/600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: 2-6S LiPo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current\u003c\/strong\u003e: 33A * 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOSFET RDS(on):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.2mR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Sensor Output\u003c\/strong\u003e: 12.75mV\/A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: 20*20mm (Φ3mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension\u003c\/strong\u003e: 29 * 31 * 5.3 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":52962949267775,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/MICOAIR_BLUEJAY_4IN1_33A.webp?v=1778599415"},{"product_id":"robofusion-vt5804-5-8ghz-2-5w-long-range-analog-fpv-video-transmitter-48ch-6-bands-2s-8s-7-36v-tbs-smartaudio-30-5-30-5mm-stack-mount-mmcx","title":"Robofusion VT5804 5.8GHz 2.5W Long-Range Analog FPV Video Transmitter — 48CH, 6 Bands, 2S–8S (7–36V), TBS SmartAudio, 30.5×30.5mm Stack Mount, MMCX","description":"\u003c!-- ================================================================\n     ROBOFUSION VT5804 — PRODUCT DESCRIPTION\n     Shopify Dawn Theme Compatible\n\n     HOW TO USE:\n     1. Go to Shopify Admin → Products → Edit product\n     2. In the Description field, click the \"\u003c\u003e\" (Show HTML) button\n     3. Select and delete all existing content in that HTML view\n     4. Copy EVERYTHING in this file (Ctrl+A, then Ctrl+C)\n     5. Paste into the Shopify HTML view\n     6. Click \"\u003c\u003e\" again to exit HTML view and preview\n     ================================================================ --\u003e\n\n\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRobofusion VT5804\u003c\/strong\u003e is a 5.8 GHz analog video transmitter designed for long-range FPV and freestyle quadcopters. It delivers up to \u003cstrong\u003e2.5 W (2500 mW)\u003c\/strong\u003e of RF output across four switchable power levels, gives you \u003cstrong\u003e48 channels across six bands\u003c\/strong\u003e, and accepts a wide \u003cstrong\u003e7–36 V input\u003c\/strong\u003e that runs directly from 2S through 8S LiPo packs — no external BEC required.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e30.5 × 30.5 mm bolt pattern\u003c\/strong\u003e drops straight onto standard full-size flight controller and ESC stacks used in 5\", 7\", and larger long-range airframes. Tune band, channel, and power from your Betaflight or INAV OSD over \u003cstrong\u003eTBS SmartAudio\u003c\/strong\u003e, or use the onboard button for in-field adjustment.\u003c\/p\u003e\n\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2500 mW maximum output\u003c\/strong\u003e — four switchable power levels (25 \/ 600 \/ 1200 \/ 2500 mW) span bench testing to extreme long-range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide 7–36 V input voltage\u003c\/strong\u003e — runs directly from 2S to 8S LiPo with no external regulator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e48 channels across 6 bands\u003c\/strong\u003e — A \/ B \/ E \/ FS-IRC \/ Raceband \/ LOW Band, including extended low frequencies for additional channel separation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTBS SmartAudio protocol\u003c\/strong\u003e — adjust band, channel, and power from your OSD without removing the model\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5 V BEC output\u003c\/strong\u003e — clean regulated power for your FPV camera\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum heat-sink chassis\u003c\/strong\u003e — integrated cooling fins help maintain output stability at 1.2 W and 2.5 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30.5 × 30.5 mm mounting holes\u003c\/strong\u003e — direct fit to mainstream full-size FC \/ ESC stacks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMMCX antenna connector\u003c\/strong\u003e — MMCX-to-RP-SMA extension pigtail included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eComplete Specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VT5804\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Robofusion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency Band:\u003c\/strong\u003e 5.8 GHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 48  (6 bands × 8 channels)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBands:\u003c\/strong\u003e A \/ B \/ E \/ FS-IRC \/ Raceband \/ LOW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e 25 \/ 600 \/ 1200 \/ 2500 mW, 4 levels switchable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 7–36 V DC  (2S–8S LiPo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Current:\u003c\/strong\u003e 850 mA @ 12 V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Voltage (BEC):\u003c\/strong\u003e 5 V for FPV camera\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration Protocol:\u003c\/strong\u003e TBS SmartAudio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna Connector:\u003c\/strong\u003e MMCX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Format:\u003c\/strong\u003e CVBS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 38 × 36.5 × 7.2 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e 30.5 × 30.5 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 11 g (excluding antenna)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong-range pilots\u003c\/strong\u003e pushing analog video links to multi-kilometer distances where 1 W is no longer enough\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFreestyle builders\u003c\/strong\u003e flying in obstacle-dense environments where RF penetration matters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6S and 8S build owners\u003c\/strong\u003e — the 7–36 V input means no extra step-down regulator is needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRepair or upgrade swaps\u003c\/strong\u003e — the 30.5 × 30.5 mm bolt pattern fits directly onto most full-size FC stacks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003ePackage List\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × Robofusion VT5804 video transmitter module\u003c\/li\u003e\n  \u003cli\u003e1 × MMCX-to-RP-SMA extension feeder cable  (87 mm)\u003c\/li\u003e\n  \u003cli\u003e2 × Flight controller signal\/power cables  (100 mm each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"background-color:#f0f0f0;padding:12px 14px;\"\u003e\u003cstrong\u003eNote — antenna not included:\u003c\/strong\u003e A 5.8 GHz FPV antenna is not supplied with this package. The VTX must never be powered on without an antenna connected to the MMCX port. Running a high-power VTX without an antenna will permanently damage the output stage. Please source a compatible 5.8 GHz antenna before first use.\u003c\/p\u003e\n\n\n\u003ch2\u003eOperating Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlways connect an antenna before powering on.\u003c\/strong\u003e Running a high-power VTX without an antenna can permanently damage the output stage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat management.\u003c\/strong\u003e At 1.2 W and 2.5 W the chassis will get hot. Mount with airflow exposure and avoid extended ground operation at maximum power.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFirst-time setup.\u003c\/strong\u003e Match band and channel to your goggles or ground-station receiver. The blue LED indicates the band; green LEDs C1 \/ C2 \/ C3 indicate the channel; the red LED (P) shows the power level by flash count (1–4).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDefault to 25 mW\u003c\/strong\u003e for bench checks before raising to flight power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Does this VTX work with Betaflight OSD power control?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The unit speaks TBS SmartAudio over a single UART TX pad on your flight controller. Once wired and enabled in Betaflight or INAV, you can switch band, channel, and power from the OSD without landing the model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can I power it directly from a 6S or 8S battery?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. Input range is 7–36 V, so 2S (≈7.4 V) through 8S (≈33.6 V fully charged) packs feed it directly. For 8S HV LiPo where full charge may exceed 36 V, use a standard (non-HV) 8S pack or add a step-down regulator.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Will it fit a standard FC stack?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The 30.5 × 30.5 mm bolt pattern matches the most common full-size flight controller \/ ESC stack. It does not natively fit 20 × 20 mm micro stacks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the LOW band legal in my country?\u003c\/strong\u003e\u003cbr\u003e\nA: The LOW band (5362–5621 MHz) overlaps with frequencies not authorized for unlicensed operation in many regions including the US (FCC) and Canada (ISED). Compliance is the operator's responsibility. North American pilots typically operate on Raceband, F (FS\/IRC) band, or specific A \/ B \/ E band channels.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Does it have a built-in microphone?\u003c\/strong\u003e\u003cbr\u003e\nA: No. The VT5804 transmits CVBS video only. For on-aircraft audio, use an FPV camera with an integrated microphone, or add an external microphone module between the camera and VTX.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Does it support IRC Tramp protocol?\u003c\/strong\u003e\u003cbr\u003e\nA: No — TBS SmartAudio only. SmartAudio is natively supported across all current Betaflight and INAV firmware versions.\u003c\/p\u003e\n\n\n\u003ch2\u003eCompliance \u0026amp; Legal\u003c\/h2\u003e\n\n\u003cp\u003e5.8 GHz transmitters operating above 25 mW require an amateur radio license or equivalent authorization in many jurisdictions, including the United States (FCC Part 97 \/ Part 15) and Canada (ISED rules). Operators are responsible for ensuring frequency, power, and operating conditions comply with all applicable local regulations.\u003c\/p\u003e\n\n\u003cp\u003eThis product is sold for radio-controlled hobby, professional drone development, and other lawful applications. It is not intended for unauthorized surveillance, signal interference, or any use that violates applicable law.\u003c\/p\u003e","brand":"RoboFusion","offers":[{"title":"Default Title","offer_id":52967260356927,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/5241\/8879\/files\/Screenshot2026-05-13154113.jpg?v=1778695958"}],"url":"https:\/\/robofusion.ca\/collections\/%e9%a6%96%e9%a1%b5%e7%b2%be%e9%80%89%e4%ba%a7%e5%93%81.oembed","provider":"RoboFusion","version":"1.0","type":"link"}